The best ways to move my 55 inch Mitsubishi TV to another home?

Question edited for spelling of the make Sunsui > Sansui.
Question moved from Computers category to maker.

They all have MODEL numbers, '55 inch' is just a size. Videos that might help.

https://www.google.com/search?q=Sansui+tv+55+inch+service+code

..

http://www.tomsguide.com/forum/57674-4-white-dots-mitsubishi-screen

This may be a main board issue if the green spot moves. This is repairable. This may be a panel issue if it does not move and it is present on the panasonic splash screen and if it affects the osd menu.

Soulds like a cold solder joint that was disrupted during the move..or a cracked board..or a dislodged connecter. Unplug, remove pack. Take ntes..remove chassis boards...clean with compressed air. Chk for cold solder spots..heat stress. Repair. Reinstall board..noting where all connectors go. Good luk. Anything more..could need servicing..burnt out capacitor,,etc.
Trace Electronics, Barrie, ON

Hi,is your tv a dlp,can you please provide the part #?

Howdy,
Yes, you can still get them from the Factory. I just checked and Mit's has all items in stock.
The SCREEN- LENTICULAR IS; 491P103030: $171.10. The LENS-FRENSEL IS; 491P104030: $212.80. The Diamond Shield IS; 760D639020: $77.90.

Hi,

Actually no just need to HANDLE WITH CARE and make sure you protect the screen,you can cut a piece of cardboard same size of you screen to protected from any object,you TV has mirrors inside just be careful,other then that you will be OK.

Regards

You have a convergence problem, probably the convergence electronics are going out or the TV has been violently moved and needs a mechanical alighnment. Small adjustments can be made from the menu.

best way i would trouble shoot this would be to get a can of freeze from radio shack and spay the tuner if the problem comes back you know it's the tuner if not spray IC one at a time till the problem happens.

hi do this as last option! there is 30,000v inside the tv!! you can die before you even think about it the only way to do soo is unplug the T.V from the wall for a week at least (so the volt will dissolves) you can turn the tv on its side you will have a problem if it will get a slap or will fall in my opinion just take on its side....but its your decision JUST BE CAREFUL PLEASE!!! good luck