After about a year of good operation, the printer now will cause create a fold in the paper . This is when the printer has been idle. After warming up, it will print properly without folds. So now we're having to print junk copies before getting a good copy. Just printing small black only printouts for the warmup seems to require even more junk copies.
I have the same problem. Which solenoid needs to be replaced, SL-5, SL-7, SL-9, SL-20 or SL-36 (info from pdf service manual).
This is a common problem with the majic colors. There is a solenoid inside the machine that needs to be replaced. Not an easy job. This should be done by a tech.
689 views
Usually answered in minutes!
yes I have the same problem does anyone have a breakdown on how to replace the silanoid?
same problem here too
My professor has been having the same problem lately. He got three years of good use out of it before it started happening about a year ago.
I have the same problem. Which solenoid need to be replaced,i.e. SL-5, SL-7, SL-9, SL-20 or SL-36.
Thanks
I'm having the same problem. Is this being caused by the silanoid? If so, how can it be corrected?
×