PIN NUMBER FOR DIGISOL DG BG4100N

Sir

Using 3g wireless Linksys Routers is best router you use for inter net connection,

For customers using the AT&T 3G MicroCell and a Linksys / Cisco router model WRT54G2 or equivalent, the following settings should be made to the router.

NOTE: Changing the broadband router / modem / gateway settings may cause other applications to stop working, and / or change the broadband router security settings for outbound data transmissions. Please see the router / modem / gateway instruction manual for more detailed information.

Procedure
1.Open Internet Explorer and navigate to the router setup page at http://192.168.1.1

2.Enter the User name and Password, click OK




3.Verify the following settings:


Automatic Configuration - DHCP
MTU: Auto
Size: 1492
4.Select the Security tab, verify IPSec Pass through is set to Enable






5.Click Save Settings






I Hope Your Router Linksys Routers Problem Is resolved By now:

In case you need online Linksys Routers help then follow us on for:

Linksys Router Support

You do not normally need drivers as they are "built in" as firmware.

On the back there should be a tiny hole push it with the tip of a pen that should reset it, after that look under google for default user and password including your model number. that should solve it for you.
...tekgods

I’m happy to assist further over the phone at https://www.6ya.com/expert/jaime_08785c7d726a554e

Read ->Reset a router

Login into 192.168.2.1 it will ask you for username and password default username is admin and password is password here click on wizard-> wireless-> WPS there you will be able to find AP pin

already have a driver attach in modem.is no updated driver because hardware dependent. so sent service center updated your modem hardware then update driver from service center it only for u worked ( it's not joke). or" buy updated modem.

N series routers can communicate at a speed of 150 Mbps, only if the wireless adapter that is built-in into the computer comes under N standard...
Most of the wireless adapters comes under G standard, which can communicate only at a speed of 54 Mbps...
The N standard routers are backward compatible, which can communicate with N standard adapters at 150 Mbps, and with G standard adapters at 54 Mbps and with B standard at 11 Mbps...


The speed in which the adapters can communicate are listed below...
B - 11 Mbps
G - 54 mbps
N - 150 Mbps

http://www.youtube.com/watch?v=sUTT8wdN_VA

Please go to www.linksys.com/download and download firmware version of your router. For manual upgrade call linksys at 18003267114 or check out other linksys numbers.

 

F5D6231-4 802.11b Wireless Cable/DSL Gateway Router Output Power +13dBm-20dBm (50mW) (max.) Range (ft/Meters) 11 Mbps 5.5 Mbps 2 Mbps 1 Mbps Outdoors 590 ft (180m) 980 ft (300m) 1475 ft (450m) 1800 ft (550m) Indoors 50 ft (15m) 125 ft (38m) 150 ft (46m) 300 ft (90m) Reciever Sensitivity -76 dBm -80 dBm -80 dBm -80 dBm