Blinking nokia in 1600 and no flashing possible

nolia 6500 slide on off step porblam

1600 flash files

At the bottom of the phone you have the headset, charging and easy flash (USB) connectors. If the easy flash (USB) connector is soiled, oxidized, dirty or the terminals are shorted; it can cause the sim card issue. The unit starts and takes long to display then "insert sim card" appears.
To resolve the issue:

1. Clean the easy flash connector with a lacquer thinner or even a 70% ethyl alcohol.
2. Make sure dirt is removed between the terminals.
3. If you can disassemble the unit, clean the connectors terminals from inside.
4. Clean also the board.

To disassemble the unit:

1. Remove A and B-covers.
2. Remove the six T6 screws.
3. Pry the board including the LCD frame and light guide assembly from the sides to remove it from the D-cover.
4. Reassemble in reverse order.
   

nokia 1600 display blank thi is my broblem

Its a Hardware problem ... Visit to Nokia Care Center as soon as possible.....

1600 flash after contact service

yes sir' JAF can solve that prob.
by using RPL logs...

try the below given jumper settings,it is applicable only if the board print is available

see budy that might be a welcome note message if ur phone works after that, menu>>> settings>>>>phone settings there is an option called welcome note delete the welcome note and than try.

flash u r phone with software before flashing change display socket witch is on board u rproblem will solve send me u r rply on [email protected]