Paring bluetooth How do I pare the Jabra to the Bluetooth of the pc

SOURCE: Problem facing with paring Jabra BT125 bluetooth with Nokia 6300 handset

http://jabra.pairx.co.uk/?l=28&pp=608

This is the tool to pair.

Njoy,
Kailash Rele

SOURCE: My blackberry cannot find my bluetooth device

put it in discovey mode and ur blackberry in discovery mode so ur bluetooth can alsofind ur phone. should work now,

SOURCE: How to get Jabra BT2050 in pairing mode?

Press and hold the center round on/off button for 10 seconds to put Jabra BT2050 into pairing mode. Type in pin "0000" when the BlackBerry 8520 detected the bluetooth headset, then the two should be paired. Hope this help.

Joseph

Testimonial: "It worked."

SOURCE: paring gnx bluetooth headphone

Press power (small triangle) and vol up (small thin button on the side near the led light) buttons together for 4 seconds until it goes red/blue for pairing (up to a min). Passcode is 0000.

SOURCE: Have a samsung finesse and i need help paring my

1- First turn on Bluetooth function on the Finesse.
2- Then start the pairing mode on the headset (for a Jawbone, make sure it is turned off then press the Noise Shield button for 3 seconds, the LED will begin to flash Red then White.
3- Back on your Finesse you should have the Bluetooth screen up with the search button in center, Press the Search button.
*the search & pairing process takes a minute or two, wait untill your headset finishes and stops blinking.
4- You should now show your Bluetooth device on your Finesse screen.
5- Now with your finger, Press,Hold and Drag the newly found headset icon onto the Search button in the center of screen.
6- A new screen will pop up then asking for the Passcode, enter: 0000 and press OK.

Your New Bluetooth Headset should now be linked to your Finesse. : )