Xerox error 024/747

You may want to ask on a Xerox forum:

https://printplanet.com/forum/digital-printing/digital-printing-discussion/10293-xerox-700-error-fault-codes

http://forum.support.xerox.com/t5/Printing/Xerox-700-061-329-error-code/td-p/210790

Xerox DocuColor 242-252-260 error code 016-311 Xerox Docucolor 240 242 250 252 260 Errors
http://ankitguptajaipur.blogspot.ca/2015/06/fault-code-xerox-dc-240242250252260wc.html
http://www.support.xerox.com/support/docucolor-242-252-260/documentation/enus.html http://printplanet.com/forum/digital-printing/digital-printing-discussion/21289-service-manual-for-dc242-252

Could be: The entered password is wrong or
Auditron security (A Xerox feature) is preventing users from Printing.
Then: Enter the correct password (Default 11111) or
Disable Auditron security settings from the Administrator menu.

Xerox Error Code 016 757 Tech on Tour
http://es.scribd.com/doc/21054313/Fault-Codes-Xerox
http://arts.ucalgary.ca/it/kb/221/xerox-printer-giving-016-757-error

On the 8570 that is either a wave amp, the print head or a bad or loose cable in between.
Not a problem for the casual user.
I hope it's under warranty.

Error Codes

If an error caused the printing to end abnormally or a malfunction occurred in the printer, then an error message code (***-***) is displayed.

If an error code not described in the following tables is displayed, or the problem persists even after you have tried the following solutions, contact the Customer Support Center.

Tip

If an error code is displayed, all print data of the printer as well as print data stored in the built-in memory of the machine is discarded.

Error Code: 127-212
Error Category: Print; Other Problems
Cause: Detected an internal print check error by the FreeFlow
Print Services Controller.
Remedy: Remove and reinsert the command/video cable between the FreeFlow Print Services Controller and the printer. Power off and on both the printer and the FreeFlow Print Services Controller. If the problem persists, call the Customer Support Center.

*** extracted from my Fuji Xerox Color 560 Printer - Printing Systems User Guide

*** I assume we have the same printer

Try this:

http://download.support.xerox.com/pub/drivers/GLOBALPRINTDRIVER/drivers/win7x64/pt_BR/X-GPD_5.246.7.0_PCL_x64.exe

We have a WorkCentre 7655 that has been working fine for ages but is now causing some issues. A user who is running Windows 7 32 bit edition is sending files to print (using the secure print function) - the system is reporting they have spooled fine to the printer - but when they go and release the document they are getting (more often than not) about 16 out of 21 pages (for example) and then a PCL XL Error (Subsystem: Text, InternalError 0x50, Operator: Text, Position: 8564). I have another document that 9 times out of ten will actually crash the WorkCentre completely and cause it to reboot mid way through printing.

The driver we are using is the latest: "Xerox WorkCentre 7655 rev 2.0 PCL6"

As mentioned the user is running Windows 7 - the printer is shared from a Windows 2003 Server which has the same version of the driver.

024 360 An error has been detected by the Controller during communications with the Printer. User intervention is required to Power Off/Power On the machine, Field Service is required if the problem persists. Printing is disabled.
http://www.support.xerox.com/go/results.asp?Xtype=docs&prodID=WC7228_WC7235_WC7245&Xlang=en_IN&Xcntry=IND

You will have to either get this printer repaired or replace it.

did you get a solution to this problem. i have the exact same situation.

If you have Warranty Still, CALL XEROX!!!, That error message indicates that you have a failed temprature sensor inside the print-head, 90% chance Xerox will have to replace print-head. Print head is VERY expensive to replace out of pocket ($500-800+)