I lost my linksys wrt54g2 v1 cd i need to install the program because i need to connect to the internet from my laptop.

Disconnect the power to it, wait 5 minutes and power back on.

Hi mariervin
linksys wrt54gs2 v1 wireless router drivers can be found at driverupdate us
It will take 2 mins from you to install...
I hope I have helped you...
enjoy

Yes, that unit did come with a CD, however, you may be in luck as the setup wizard is available on the Cisco site here.
Regards,

It sounds like you have your max amount of users reached. You need to go into your router and set the amount of users that can connect to the internet. Either via program on the computer or actually consoling in to the router.

Hope this helps out.

You don't need any kind of installation CD. Just open your wireless connection manager on the OS you're using in your laptop and connect to your wireless network.
If you need to configure the router, go to 192.168.1.1 in your web browser to open the router's configuration page.

Are you trying to install the router.
You can do it manually without the CD.
MAke sure that your computer is able to go online through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router ad the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

I think, you can get the installer in the linksys website.

Stop using the setup disk. It does not work. Connect to your router via a web browser to 192.168.1.1. Username blank, input your password and configure the router as normal.

Go to linksys.com. Go to support. Type in your router model number. The software will appear on the screen for you to download.