I have a Hatachi 60UX54B and if I leave it unplugged for a few minutes & then plug back in the set will power up for a few minutes then shut down and will not power up again. It seems that when the unit warms up the the power drop out. Thanks in advance, Mark
Does the convergence look OK before it goes out/ Have you opened the set to see if there is any liquid or any staining on the printed circuit boards right under the picture tubes? This set is very common for the CRT coolant to drip out of the tubes and fall onto the printed circuit board. good Luck
Hello, please check Q710 in high voltage circuit. If you need more info please advice. Arpi
98 views
Usually answered in minutes!
×