Failed to complete job. check log - Konica Minolta Bizhub c203 Copier

RDX tape drives, by HP (tandenberg)
did you reload all that HP software and drivers fresh?
did you try fresh tape.
i replace the tape drive, (new , used, NOS , from whom, ebay)

i bet the tape drive, logs errors, if you look,
the driver software will log that, and you can see why the tape
failed, my guess, damage to the tape, end to end.
try fresh new tape, NEW in a box, not used.

on the control panel screen is section for you to check the status of print/scan items. you will be sent to a screen you select the job and check details, if this was a scan to email might check the mail server if scan to pc check folder to scan to is a shared folder

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

check the log and the log can give you details as to why the scan did not go thru

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

According to the manual which I have put here under printers and copiers "If the job or operation does not complete correctly, check the End Code, and
perform the necessary operations according to the End Code displayed. You can
check the End Code in the Details screen under Log in the System Monitor screen.
(See "Checking Job Details," on p. 2-8.)
canon imageRunner 6020 Reference Manual Reference Manual List Of Error...

What model sir?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

scan to what email or pc

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Do you have account codes on? If so, go into your printer preferences and put in your code info.

Hi,

Follow the steps below to resolve the issue

The print queue and Dock printer icon
When you start a print job, you will see your printer icon appear in your Dock. Click the Printer icon to open the print queue, which is a list of print jobs that are printing, on hold, or paused. The print queue will also display messages sent from the printer.
You can alternatively open the print queue from the Print & Fax pane of System Preferences.

In the Print Queue toolbar you have these buttons:

1. Delete - Deletes the selected print job.
2. Hold / Resume - Will hold / resume the selected print job.
3. Job Info - Shows details of the selected print job, such as job name, status, Completed, Job Message, and so forth.
4. Pause / Resume Printer - To Pause / Resume the Print Queue.
5. Supply Levels - Will drop down the Supply Levels sheet showing you the levels of ink / toner your printer has.
6. Printer Setup - Lets you configure the printer's name and location details.
7. Printer - Sets the Print Queue window into Printer mode.
8. Scanner - Visible if you have a multi-function printer connected via USB. Click it to set the Print Queue into Scanner mode.

You can see what your print job looks like with Quick Look. Click the arrow on the print job just to the left of the Status column or select the print job and press the Spacebar.
From the Print Queue menu bar, the "Printer" menu has these additional options:

1. Customize Toolbar... - Used to add and remove item from the Print Queue's toolbar.
2. Make Default - Will set the printer pertaining to this Print Queue your default printer.
3. Print Test Page - Will send the CUPS Printer Test Page to your printer.
4. Network Diagnostics - Will bring up the Network Diagnostics application, used to check each layer of your network connection.
5. Log & History - Used to open the Console application and show you the log entries for your current and past print jobs.
6. Show Printer List - Will open the Print & Fax System Preference showing you the list of Print Queues.

From the Print Queue menu bar, the "Jobs" menu has these additional options:

1. Show / Hide Completed Jobs - Will alternate Show / Hide in the Print Queue all completed printer jobs and completed functions, like checking the supply levels of your printer.
2. Show Everyone's / My jobs - Will alternate showing Everyone's / My print jobs.

You can control-click (or right-click) your printer icon in the Dock for this convenient menu:
From the Dock menu you can see your printer's status, toggle Pause and Resume Printer, Auto Quit (once print job completes) on / off, and from the Options sub-menu you can toggle Keep in Dock on / off.

This happened to a computer I was working with once. Give this site a try.

http://thinkinginpixels.com/quick-fixes/fix-windows-xp-log-onlog-off-loop/

Good Luck,
--T

From the panel, check the job log.
select the job that failed and then the "DETAILS" button will become active and present a more detailed report.