Ge cordless model 26930 memory dial

http://www.epartner.atlinks.com/Thomson_asia/GE/file.aspx?filename=GE/product_docs/26930-UserGuide.pdf


http://www.epartner.atlinks.com/Thomson_asia/GE/
file.aspx?filename=GE/product_docs/26930-UserGuide.pdf

Click below to download manual;

Download User Manuals

hope this may help;

regards,
VOTIT

Since you declined to specify the model of your GE phone, I can only direct you to select it from the list at
http://www.home-electronics.net/ge/pc/user-manuals.asp
to download the manual.

Since you declined to specify the model of your GE cordless phone, select it from the list at
http://www.home-electronics.net/ge/pc/user-manuals.asp
to download a copy of the manual.

After a lot of research, I have found that GE has handed the phones and their manuals down to a company called "ThomsonTM" And if you come across any of problems for this phone in the future, I'll give you their phone number so you can still get help, at: 1-800-447-1700

Otherwise for help right now for the speed dial issue, I could only find directions that were of general use of multiple GE Cordless Phones, so it's worth a shot if you've got the time, otherwise, I suggest calling the number above.

Here is goes:

1.)Raise the phones reciever, or push the "Power/On" button.

2.)Press the "Store" button.

3.)Press the number 0 through 9 or a quick dial letter A, B, C,... to assign, then press the "Store" Button again to confirm the entry.

4.)Enter the number you want to assign the speed dials memory location, and press "Store".

5.)If your GE Phone prompts you to enter a Contact Name, use the keypad to enter it. Press the "Skip" button to enter a space, and the "Store" button to confirm your entry once again.

Once again, this is just a generalized GE Cordless phone guide, and may not be exact to your phone, in which I further suggest calling the electronic product's helpline by ThomsonTM at:
1-800-447-1700 begin_of_the_skype_highlighting

Hope this helps!
Remember to give me 4 Thumbs Up
for all the hard work to the Community! :D
~~Dayminner

Select the model of the phone from the list at
http://www.uniden.com/index/manuals_results.cfm?cat=1

http://www.home-electronics.net/ge/pc/user-manuals.asp
I found 25952EE1 at this site. On page 2 of User Guide, it describes input of up to 10 preset phone numbers. Hope this helps.

You will need the model number. They might have the manual at this link
http://www.home-electronics.net/ge/pc/user-manuals.asp

how do you change GE Model 27923 2.4 GHz cordless phone from pulse dial to touch phone dial? I lost my instruction manual Thanks

My Mom had this same problem.   I found these instructions on Uniden's website (uniden.com) under the "Owner Manuel" section.


Here you go - good luck!








Using the Speed Dial Memory 
Storing Numbers in Speed Dial Memory 
Your cordless phone can store up to ten numbers (up to 20 digits each) in the speed dial 
memory. To store number in memory: 
1) When the phone is in standby, press [memory]. The talk/batt low LED flashes. 
2) Use the keypad to enter the phone number. 
 (To enter a 2-second pause between numbers, press [redial/ 
pause]. Each pause counts as a digit. ) 
3) Press [memory] again. 
4) Select the speed dial location where you would like to store the 
number ( [0] to [9] ). You will hear a confirmation tone indicating 
that the number has been stored. 
NOTE: 
• Storing a number to a speed dial location will 
overwrite the any previously stored number without 
warning. 
• When storing numbers into memory and the handset is idle (i.e., no key is 
pressed) for more than 0 seconds, it will beep rapidly, and then the phone 
will return to standby. 
Dialing a Stored Number 
1) When the phone is in standby, press [talk], and listen for a dial tone. 
2) Press [memory] and enter the speed dial entry ([0] – [9]) that has the stored number 
you want to dial. (If you enter a digit that does not contain a stored number, the 
handset will beep rapidly, and the phone will not dial.) 
Chain Dialing 
The speed dial memory is not limited to phone numbers. You can store any number (up 
to 20 digits) that you need to enter once your call connects. This is referred to as Chain 
Dialing. An example is a frequently refilled prescription number. Store your pharmacy 
phone number in one speed dial and your most frequently refilled prescription number 
as another speed dial. To use, once you ring your pharmacy's automated prescription 
line, simply press [memory] and the speed dial number where you stored your account 
number. 
Erasing a Stored Number from Memory 
1) With the phone in standby, press [memory] twice. 
2) Press the number of the speed dial entry. A tone indicates that the stored number is 
erased from memory.