Bottom jar for George Forema blender broke

Unfortunately Kitchenaid's design on those blenders is a one piece unit, over time the seals wear out and you have to replace the entire jar assembly, they usually run 40-50 dollars and can be found from several vendors.

Here is a link to the replacement jar on our site: KitchenAid Blade Jar Assembly W10555711

Older KitchenAid blenders had a jar that was made so the blade assembly could be removed for cleaning. On the newer models the blender jar and the blade assembly are all one unit so you have to purchase a new jar to get the blade assembly. All of this is dependent on which model of blender you have.

We would be happy to help you. Please a give us a call at 1-800-339-9297 we would be happy to help! One of our repair technicians can talk you through the repair over the phone free of charge. On the bottom of your blender is the model and serial numbers; have these handy when you call so we can help you order the correct part.

We have several blender jars on our Web site http://www.mendingshed.com/kitaidblen.html for KitchenAid blenders. If we don't have the blender jar that fits your model in-stock we can order it and ship it to you. Please contact us with any further questions. You can also email your model number or questions to [email protected]

Sincerely,

Mendingshed.com Staff

The best way that I've found to remove the bottom from the blender jar is to put the blender jar back on the blender base (make sure it locks in place) and then turn the jar to the right. You'll feel the jar detaching from the base. Once it's loosened up, remove from the base and finish turning the bottom, manually. Before I found this method, I had tried everything to get the plastic bottom detached from the jar. Without removing the bottom, there's no way to clean it properly and rather than be unsafe I'd need to throw the whole works in the trash. But the method I've described above works every time!

I have a replacement glass jar for you. My base broke so I am willing to sell the glass jar part. please email me at [email protected]

I HAVE THIS EXACT BLENDER AND HARDLY USED IT AT ALL EXCEL COND, IT'S BEEN IN MY STORAGE CABINET FOR YEARS..TRYING TO SELL IT...ARE YOU INTERESTED?
I HAVE A PICTURE ON CRAIGSLIST IN THE PHILA AREA.
LET ME KNOW...
[email protected]

MAKE SURE THAT NOTHING IS BROKE AT THE BOTTOM OF THE JAR.

I HAVE THIS EXACT MODEL AND HAVE NOT USED IT FOREVER...EXCEL CONDITION, TRYING TO SELL TO SOMEONE WHO WOULD LIKE IT.

NOTHING WRONG, JUST DON'T NEED IT LAYING AROUND COLLECTING DUST.

THIS BLENDER IS AWESOME!

INTEREST?

Remove the bottom clean the unit fully. Add the bottom blad assebly and this will fix your problem. The "sooty" is plastic shavings. Take note that the fitting were the "jar" connects to the motor that this is not wearing away. The unit i have broke and i am unable to find a replacement blade assembly.

It looks like their parts are handled by Fox International. here is the contact info:
For parts and accessories for your household appliance, please visit our partner, Fox International, or use the following.
Phone Number: 800-738-0245
(Monday-Friday, 8:30 AM to 8:00 PM, E.T.)
Email: [email protected]

Hi,
purchase from any of the below links>>

http://buyitnow64.stores.yahoo.net/habeplbljar.html

http://cgi.ebay.com/KENMORE-BLENDER-GLASS-JAR-WHITE--BQ_W0QQitemZ250368347086QQcmdZViewItem

http://cgi.ebay.com/KENMORE-BLENDER-GLASS-JAR-BLACK-BQ_W0QQitemZ280310226122QQcmdZViewItem

please rate this solution.
Thanks for using FixYa.

villaware 1-866-484-5529