Panasonic KXT7630 MESSAGE RINGER LAMP

If the red message/ringer lamp never lights up, the solder connection to the LED may be broken, or (more rarely) the LED may have broken inside.

when the other ringer patterns are set in your PBX the lamp may not flash.

Other then POWER BUTTON light there are three lights more
1. lamp indicator
2. temperature indicator
3. computer input
witch one light is flashing RED or illuminated RED with POWER BUTTON orange light.
If LAMP INDICATOR light is illuminated RED than lamp runtime has reached 1800 hours. but projector still working.
If LAMP INDICATOR light flashing RED than lamp circuit failure, or abnormal function or lamp unit is damaged. In this case projector doing the same behave just like your projector.
if TEMPERATURE indicator illuminating RED the projector still projecting and if flashing RED than turned of itself

Press the MESSAGE button and look at the display. It will tell you where the message came from and one of the soft keys will be ERASE or CLEAR.

Carl

Of course it will, you just have to know how. Press the MESSAGE button and look at the display. It will tell you where the message came from and one of the soft keys will be CLEAR.

In Panasonic's funny way, they let you call an extension and press the MESSAGE button or DIAL the digit "4" and it sets the message waiting lamp. Kinda stupid (the 4 part) but "it is what it is" :-)

Carl

Hi,
Turn On tv.
Press and hold Volume Down button on TV Front and PIP/ SPLIT button on Remote at same time for 6 Seconds to reset Lamp Timer and tv will show you timer reset message screen.
Hope this info will help you.
Thanks.

Message/Ringer Lamp: The Message/
Ringer lamp informs you visually that you
have a message or a call.
When you receive a call, the lamp
flashes depending on the ringing pattern.
When the ringing pattern is set to Single
(Slow flash), Double (Moderate flash), or
Triple (Rapid flash) in your PBX, the lamp
flashes. When the other ringing patterns
are set in your PBX, the lamp may not
flash. (e.g., S-Double, Call Waiting
Tone1).
When someone has left you a message,
the lamp is lit continuously.

Please note that the above indicates that ring patterns are set in the the PBX. These are issues that require a real person to sit at the main system and program the features that users need. I hope you have an I.T. person that knows your phone system. If you don't, you'll have to find a communications company in your area that can program your system. Thanks for using Fixya.

See the button labeled MESSAGE? Push it and read the display. Now for fun, call someone and push MESSAGE when it rings. WoW!.

Your phones do other tricks. *700 plus your ext cancels all Messages.

Carl

Go to another phone and dial *701 plus the extension of the 7667. Does the MW light work? If it does and all the others work from VM, then you probably missed an assocation of the mailbox with the extension. It's fixed from the console if it's a TVA system or from the mailbox manager's box, 999.


Carl

There's a message waiting. Press the MESSAGE button and look at the display. It will tell you who left the message.

You can clear all messages by *700 and your extension.

Carl