Roland versacamm vp 540

This is a Professional quality printer. Contact Roland Support direct.

https://www.rolanddga.com/support/products/print-printcut/soljet-pro-iii-xj-540-54-eco-solvent-inkjet-printer

..

Question edited for clarity, full 'maker model (what it is)'.
Question moved to the only Roland Printer category.

Try a Head Soak. Make sure the tube to the waste ink bottle is not blocked or pinched.

https://www.google.com/search?q=versacamm+vp540%2C+coverig+image+in+black+ink

..

Question edited for FULL 'make model (what it is)'.
Question moved from Computers to correct category.
"DATA ERROR CANCELING..." Output was stopped because a problem was found in the data received.
Operation cannot be continued. Check whether or not there is an error in the data. Check for a problem with the connector cable or the computer, and redo the operation from setting up the object to be printed on.Roland Technical Support.

VersaCAMM VP-540 54" Eco-Solvent Inkjet Printer/Cutter

https://www.rolanddga.com > products > print-printcut
VersaCAMM VP-540 54" Eco-Solvent Inkjet Printer/Cutter technical support page such as support articles, support guides, software updates, firmware, ...

..

Did you ever fix it? Mine is doing it now.

Could you try
(1) Temporarily stick a white strip over the sensor where it detects the media or
(2) On the length of the media or
(3) Even staple same sized white media below the black one which you can un-staple after printing.
kindly ignore if these are (s) tupid answers

hello, je viens de remplacerla carte m?re de mon Roland sp-540v et la machine ? l allumage m affiche sum error, aidez moi ? r?soudre cet error

hello
i add a video explaining how to install sp540v in win7
u need to install the Intercon-NetTool (that u can download from the Roland website) to allow the comunication with the plotter. its all well explained in the video. good luck

Just one Question?
Do you have your LAN Cable tied with your AC power Cable?
I have th same problem on two VP540 after seven years of trouble free working. A few months ago I was reorganizing my shop and I tied up both cables to avoid tangle cables with machine wheels every time I move It.
I think that the noise produced by AC Voltage Affect the VP540 ethernet port.

this sounds like a scan motor error. clean encoding strip and test. If still wavy remove scan sensor the one that reads the encoder strip, clean with alcohol, replace and test. if still bad replace encoder strip and the eye that reads it.