What kind of insole can I use for dress shoes?

a glue called shoe goop ive had luck with

It depemds on how new they are. There is a battery in the insole that needs to be changed. Lift the insole and it should be right there.

Absolutely. better quality shoe stores have replacement insoles that you can select.

it's very simple. just take out the insole from the sneaker, then put some talcum powder in the sneaker, then put the insole back. this will eliminate the squeaking.

the problem is that sweat gets between the insole and the inside surface. the friction between the two is the cause of the squeaking.

There is a battery in the insole. Lift the insole and the battery will be in the heel

I would recommend 26.5 at least for street wear. Check the fit and see how your foot fits on the insole

Try both sides, only one side should fit inside the shoe well.

I've had this problem with my daughter's shoes, and her foot is very narrow. I cut down some generic-brand Dr. Scholl's-type insoles (available at grocery and drugstores) and that did the trick.
1. Get the appropriate sized insoles, and lay the right show on the right insole, and the left shoe on the left insole. Trace them with a pen.
2. Cut out the insole, cutting slightly inside the lines-- the inside of the shoe is smaller than the outside.
3. Work the insoles inside the shoe. Use your fingers to feel around the edges to see where you need to trim them to fit.
4. If it's too long, don't trim all the length off the toe, or all the length off the heel... you'll mess up where the arch curves.
Good luck! I hope it works for you.

Does the shoe have the mounting plate already inside the holes? If it does screw the the cleat in as usual. If it doesnt, remove the insole to install it.