No coffee coming out of front taps

I would imagine the main pump/heater unit has failed. Probably better to buy a new one, unless you can take it back to the outlet where it was purchased.

Vicki, i think that clicking sound is ok when you press start. TRY THIS.
1. close door securely 2. press power after putting detergent.3 After making your selction for different levels eg hot,warm cold, press START.
usually these buttons are pretty reliable, GL

Hi,

Here is a tip that I wrote that will give you some things to try that will helpyou get your Keurig coffee brewer workingagain.

Keurig CoffeeBrewer not making a full cup of Coffee
heatman101

Hi,

Here is a tip that I wrote that will give you some things to try that will help you get your Keurig coffee brewer working again.

Keurig Coffee Brewer not making a full cup of Coffee

heatman101

i'm having the same problem. it makes a sort of grinding noise but no coffee comes out.

Hi,

Here is a tip that I wrote that will give you some things to try that will help you get your Keurig coffee brewer working again.

Keurig Coffee Brewer not making a full cup of Coffee

heatman101

Hi
Check to make sure that everything is in place. The main culprit is usually the drip tray, or the brew unit.

The vibrating water pressure pump is not working and it migh be stuck due to scale or damage. Howver if you hear the loud noise of the pump then the problem is the coffee solenoid valve which it might be stuck or damage.
Good Luck
Please remeber to vote for this answer

in our machine we wanted a stronger coffee so we adjusted the auto grinder (where the coffee beans are housed) to the finest setting thinking the finer the grind the stronger the coffee...after doing this the machine wouldnot make coffee...we sent it away while still under warranty and the tech said that the grind selection was too low so they just turned the grinder back up a notch and it worked fine ....dont know if this will help but it's worth a try!

Hi,

Initially, have you tried a full hard reset? If not, pls unplug from the mains. Most current devices would reset and revert back to factory default settings (assuming no internal hardware fault) when unplugged for a considerable period of time (from a few minutes to a couple of hours). Of course doing a hard reset erases all glitches.

Pls post back for any development(s) or even the lack of it.

Hope this be of initial help/idea. Good luck and kind regards.

Thank you for using FixYa.