3.1 DishnetWork remote problem

Hey there marlastewart!

I can definitely assist you in getting the codes for that. You can view this link http://www.dishnetwork.com/SupportSection/apps/remotecodes.aspx to search for codes based on the equipment and brand.

If none of the codes work let me know and I can try further troubleshooting with the remote!

Tommy Faust
DISH Internet Response Team

Hey Hiall Hollingsworth,

I would need the remote model to provide more specific codes, but a few for Yamaha Stereo are 663, and 733. You can view the link below to get model specific codes!

Link: http://www.dishnetwork.com/SupportSection/apps/remotecodes.aspx

Let me know if you have any other questions!

Tommy Faust
DISH Network

Hi there, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to help. I will list here for you the best codes for a 5.4 IR remote to try with a Go Video DVD/VCR combo. I hope this information is useful and if you have any other questions please let me know.

5.4 IR remote - 1693, 1822, 1569, 1692.

Instructions for addressing the remote to the DVD/VCR combo
1. Press and hold down the AUX button until all the mode buttons light up red.
2. Enter the four digit code.
3. Press the pound(#) button once.
4. Try the functionality of the device.

Our remotes may not carry all of the normal functions your factory remote would. The remote you have is capable of learning additional functions, the link below will open a tutorial guide for this: www.dishnetwork.com/SupportSection/FileStream.ashx?ID=678

Daniel Busa
DISH Network
Customer Service

I'msorry I did also attempt to locate a Prima remote code within DISH Network's database aswell but unfortunately I was unsuccessful and have found no remote codesfor the TV you have. However, we can still attempt to program the DISH Networkremote to the Prima television without a remote code, this would be done bycompleting a Power scan. If you decide you would like to program the DISHNetwork remote to your TV using the power scan, I have included instructionsbelow to further assist you. Withthe desired equipment on, press and hold the correct Mode button (In this casethe mode button will be "TV") until all the other mode button back lightsilluminate, then release. 1. Pressand release the Power button. 2. Pressthe Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, theequipment will power off. 3. Pressthe POUND (#) button. If the codeentered is valid for the remote, the mode light flashes three times.
After successfully completing the power scan to program the DISHNetwork remote to your T.V the remote should now control your TV. I hopethis helped! Please feel free to let me know if you have any other questions orneed additional help. -Kirstie DISHNetwork

Hello, it probably just readdressed try these links the first one will help you getting your receiver readdressed, the second will help you address your TV.

http://www.dishnetwork.com/SupportSection/remote-setup

http://www.dishnetwork.com/downloads/pdf/user_guides_and_manuals/Remote_Codes_Web_Page.pdf


Daniel Busa
DISH Network Customer Service

lt911

I have provided instructions on how to readdress the remote to your receiver. If this doesn't work, we may need to replace the remote. I hope this helps.

Readdress remote to receiver, step 5:
http://www.dishnetwork.com/SupportSection/remote-setup

Ray Calo
DISH Network

http://tech.dishnetwork.com/departmental_content/TechPortal/content/tech/remotes/8.0.shtml This is the site that will help you with your issue.

Thanks for using Fix Ya.

On your dish remote, press and hold the tv button until all 4 buttons light up, then release. push either of the power buttons once. Now start pushing the down channel button, It's the one right below select, continue pushing it until tv turns off. When tv goes off push down button one more time then push up button, when tv turns back on stop and press # key, tv light will flash 3 times and should be set. Note....if u press down button and tv does not turn off after going through all codes( tv light will start flashing) press cancel and try again only channel up this time. hope this helps.

http://157.254.235.130/public/RCR860.pdf
http://157.254.235.130/public/RCR860_code_list.pdf

These are the Manual and The Codes List!!

Enjoy!!