Refuses to eject says locked

Maybe Eject can only be performed through the remote controller if there's no Eject button on the TV. A loose, or fallen off, drive belt can cause the dvd player unable to eject. Listen to the drive motor after pressing the eject button. If it runs but no eject, it means the drive belt is loose or fallen off. If no sound at all, the drive motor itself is dead.

To unlock the Blu-ray player, follow these steps:

1. Press the Stop button to place your Blu-ray player in stop mode.
2. Press 4-8-2-7-3 on the remote control. Lock Off will appear in the upper left corner of the TV screen.
3. Press the eject button on the remote control.
4. The disc tray opens on the Blu-ray player.

If this does not resolve your issue:

1. Unplug the player and hold the power button for about 20 seconds.
2. Connect the power cord again and with no disc in the player, press and hold the Stop button on the panel until your TV displays the message, "Resets all settings to the default values". After a few moments the Player will turn itself off.

Works with most Sony Players

Step 1
Unplug the power cord of the Sony Blu-ray player. Plug the power cord back in. Turn on the Sony Blu-ray player. Turn on the TV to which the Sony Blu-ray player is attached. Wait for the "No Disc" text to appear on the front of the Sony's LCD display and on the TV's screen.

Step 2
Press the "Eject" button on the remote control. Wait for the disc tray to eject itself from the front of the Sony Blu-ray player.

Step 3
Press the "Disc Info" button on the remote control. Look for a number to appear on one of the upper corners of the screen of the TV.

Step 4
Press the "Disc Info" button repeatedly until the number "9" appears on the TV's screen. This number indicates that the Sony Blu-ray player is now set for "multi-region" and will play any Blu-ray disc that is commercially made.

Step 5
Turn the Sony Blu-ray player off using the remote control. Turn the Sony Blu-ray player back on using the remote control. Press the "Eject" button on the remote control to close the disc tray. Turn the Sony Blu-ray player off using the remote control.

Hold down the play button, it will take a bit but it turns of the child lock

First try unplugging and plugging back in then remove caseing and insert paper clip under locking mechanism and hit eject...your locking mechanism signals that there's no cd in it and so to it there's no dvd or cd...hope that helps:)

If you can give me the model number for your television then I should be able to answer your question. If there is not an "eject" button on the remote then I would suspect there is an "eject" button on the TV itself where the other buttons are located or near the dvd player.

I found this on the PROSCAN website under customer support manuals.The website is www.oncorpus.com.I hope this information helps you with your problem. IMPORTANT THE LABEL SIDE OF THE DVD MUST FACE THE BACK SIDE OF THE TELEVISION 1. Press the ‘INPUT’ button to select ‘DVD’ mode, if no disc is inserted yet, the display shows ‘No Disc’.
2.Insert a DVD with the printed side facing towards the rear of the TV/DVD Player (see below)
3.The TV will first display ‘Loading’, then change to ‘DVD-video’. Most DVDs will show some preliminary
information then stop at a main menu screen.
4. Press PLAY/PAUSE to play it directly. Or press the DVD-MENU button to access the disc menu during
playback.
5.Use the direction button on the remote control to select the desired option. Press ENTER to select the
option or press the ► button. Playback will now commence.
6.After playback, press the EJECT button on remote control or EJECT button on TV/DVD to remove the
disc.
Note: No function‘’ will sometimes appear on the screen after a button is pressed. This indicates that the
function is not supported at the current time.

sounds like your tape is jammed try turning the tv on and ejecting the tape while using something to try to lift the tape up and out good luck.....

Based on what I have read AKAI has reoccurring problems with power supply and bad DVD sound. The problem you have is caused by the DVD player trying to start. Never leave a disk in when you shut it off or you will have the same symptom you are describing.

Press and Hold EJECT Button, While UNLOCK Is Displayed :-)