Windows 7 SLP-220 driver - Seiko Smart Label Printer 220 Thermal

Seiko has really downgraded its legacy product support and it has minimized its application and driver software available for download. To find software for your SLP 200 you'll have to good to a third party site like Drivers Guide. The link below is for version 7.0.3
Seiko SLP 420 Free Driver Download

Important tips when finding and downloading application/ driver software from non-OEM sites

1. Never install any application from a non-OEM site that says it will scan your computer to determine what files you need. - search using the manufacturer name, model number, and current operating system on the computer you want to install the device on.

2. Only install the files you found. Never download any software suggested.

3. When installing the downloaded files, always select Custom Installation to make sure you only install the software you need. In this case only the application and driver files, nothing else ( no driver updating, security scanning, toolbar, etc. programs).

In the specific case of the Seiko Smart Label printer make sure your printer is not hooked up until the Seiko software tells you to.

I think you're out of luck. Seiko has really downgraded its legacy product support and it has minimized its application and driver software available for download. You can try using a Windows 7 package. To find software for your SLP 100 you'll have to go to a third party site like Drivers Guide. The link below is for version 7.0.3 while it says its for the SLP 420 it's actually compatible with several models
Seiko SLP 420 Free Driver Download

Important tips when finding and downloading application/ driver software from non-OEM sites

1. Never install any application from a non-OEM site that says it will scan your computer to determine what files you need. - search using the manufacturer name, model number, and current operating system on the computer you want to install the device on.

2. Only install the files you found. Never download any software suggested.

3. When installing the downloaded files, always select Custom Installation to make sure you only install the software you need. In this case only the application and driver files, nothing else ( no driver updating, security scanning, toolbar, etc. programs).

In the specific case of the Seiko Smart Label printer make sure your printer is not hooked up until the Seiko software tells you to.

The official Seiko site is:
Software Driver Downloads
However, Seiko has deleted its legacy printer support so you will have to find your 220 drivers from a third party site. The 220 is pretty old so you need to use an older driver and it may not support newer operating systems
Seiko SLP 200 USB Driver Free Driver Download

Note: With Seiko Smart Label printers make sure your printer is not connected to your computer until the Seiko software tells you to.

Important tips when finding and downloading application/ driver software from non-OEM sites

1. Never install any application from a non-OEM site that says it will scan your computer to determine what files you need. - search using the manufacturer name, model number, and current operating system on the computer you want to install the device on.

2. Only install the files you found. Never download any software suggested.

3. When installing the downloaded files, always select Custom Installation to make sure you only install the software you need. In this case only the application and driver files, nothing else ( no driver updating, security scanning, toolbar, etc. programs).

The official Seiko site is:
Software Driver Downloads
However, Seiko has deleted its legacy printer support so you will have to find your drivers on a third party site. I've included links to your drivers below:
Seiko SLP 420 Free Driver Download

SIISLP200 Drivers Download for Windows 7 8 XP Vista

Note: With Seiko Smart Label printers make sure your printer is not connected to your computer until the Seiko software tells you to.

Important tips when finding and downloading application/ driver software from non-OEM sites

1. Never install any application from a non-OEM site that says it will scan your computer to determine what files you need. - search using the manufacturer name, model number, and current operating system on the computer you want to install the device on.

2. Only install the files you found. Never download any software suggested.

3. When installing the downloaded files, always select Custom Installation to make sure you only install the software you need. In this case only the application and driver files, nothing else ( no driver updating, security scanning, toolbar, etc. programs).

Hi,

First of all I want to know this problem is occurred first time? If

yes then uninstall the software and restart your machine. Then install

again. Hope so your problem will be solved. Otherwise you should

download Smart Label v7.0.3.418 and try to install the new one.

Thanks.

It is my pleasure to guide you.

After doing some research I found what may be what you need. This comes from http://social.microsoft.com/Forums

QUOTE

Wednesday, October 13, 2010 9:00 PM
Darin Smith MS, Microsoft Contingent Staff, Owner

Computers, which are built by large manufactures that come with Windows Pre-Installed, come with two (2) Product Keys:

A) OEM SLP: This key comes pre-installed in Windows, when it comes from the Factory. This key is geared to work with the OEM Bios Flag found only on that Manufacturer's computer hardware. So when Windows was installed using the OEM SLP key (at the factory) Windows looks at the motherboard and sees the proper OEM Bios Flag (for that Manufacturer and that version of Windows) and Self-Activates. (that's why you did not need to Activate your computer after you brought it home)

B) COA SLP: This is the Product key that you see on the sticker on the side (or bottom) of your computer. It is a valid product key, but should only be used in limited situations (such as if the OEM SLP key stops self-activating for whatever reason). The key must be activated by Phone. (Note: All manufacturers that use the OEM SLP system are required by contract to include a Certificate of Authenticity (COA) sticker, that has a COA SLP key, on the computer)

Your Windows is using an OEM SLP key, but (for whatever reason) cannot see the special instructions in the computer's motherboard and is unable to Self-Activate.

To fix the issue, you will need to change out the OEM SLP key with the COA SLP key. The normal way to do this is to click the 'Start' button, right-click 'Computer', select 'Properties' and then click 'Change Product Key' (located in the lower right-hand side of the window). Enter the COA SLP key and follow the instructions in the Change Product Key Wizard.
Alternate steps to change the product key
1) Click the Start button
2) Type: slui.exe 3 and hit the Enter key
3) Type in the Product key from the sticker on your computer
4) Click the Next button.
5) You will be asked if want to Activate, click ok
It will attempt to Activate by the internet and will return an Invalid Key error (this is ok, continue to step 66)
6) Click the Start button
7) Type: slui.exe 4 and hit the Enter key
8) Select your location in the drop down menu and click the Next button
9) The next screen provides the number to call to Activate by Phone
NOTE: when you call that number, you will first hear an Automated Voice. If the Automated Voice gives you an option to talk to a Live Activation Rep., select that option. If not, do not enter any numbers. This should force the Automated Voice to transfer you to a Live Activation Rep. Trying to Activate thru the Automated Voice will not work, in your case; only thru the Live Activation Rep. will your Activation be successful.

UNQUOTE

I learned something new while doing this research. I like doing new things that is why I do this.

Good luck and please post back that you are successful or that I can be more helpful.

You can download the software from http://verizon.net/zyxel There are 3 folders, one for Windows XP, one Windows Vista, and one for Windows 7. You can extract the folder you need for the version of Windows you have. Then you can use the Found New Hardware Wizard to install the drivers.

Hi,
On your motherboard power is setup like so:

10 9 8 7 6 (no pin on 6)
1 2 3 4 5

1- HD_LED_P
2- HD_LED_N
3- RST_SW_N
4- RST_SW_P
5- RSVD
6- No pin
7- PWR_SW_N
8- PWR_SW_P
9- FP PWR/SLP
10- FP PWR/SLP

you have 5 connectors from the chassis' front (with cable colors):
-P LED (white)
+P LED (green)
HDD LED (yellow/white)
RESET (white/blue)
POWER (orange/white)

You just insert cables according to these nos. Do this job carefully that's why i am giving you full details about cable and its colors.

Regards

Ashly

Re install the driver. Download this Driver Update Software for XP Vista 7 8 and update. I hope this helped
Gerard

Please get the driver here for your printer : www.lexmark.com/lexmark/.../0,6959,204812589_652569478_0_en,00.html
www.nodevice.com/free_downloads.html
Best regards, Jay__ngb