Manual for singer curvy 8763 - Singer 8763 Curvy Computerized Sewing Machine

You may find an answer here:

Why does the electronic beeper beep and the sewing machine won sew Sewing...


SINGER 8770 CURVY Instruction Manual Error Messages

..

try this link... Singer 8763 Curvy Manual

Singer curvy beeps 4 times and stops sewing

Singer curvy keeps beeping Cannot keep sewing without it stopping

http://www.serifwebresources.com/phpBB2mt/viewtopic.php?p=6483&sid=b2760156fd5709bde105ab8712605c44&forumid=194553

Consult your owner's manual. There is a handwheel release that, when loosened, will allow the bobbin to wind but stops the needlebar trying to stitch.

...

Reset main power. perhaps power off by unplugging. If that won't work then find the main operating buttons on the right side and push each one.
You should have a manual on this fairly new machine that will help you.

Moses

insert the needle all the way up. if it is not a timing issue, try to lift the needle shaft

Yes, your machine takes a low-shank foot. That seems to be the most commonly used type for newer machines.

yes

A Curvy isn't an Athena. I have a Curvy and it is a low-shank machine that can use a variety of snap-on feet.

Your machine takes a low-shank foot, and they are very commonly available, either from eBay or Amazon, or any site that sells presser feet.