PAPER JAM EVERY 3 PAPERS GET JAMED WHEN PRINTING, THE PAPER IS FINE ITS NOT OVERLOADED, JUST THE RED LIGHT COMES ON A LOT SAYING PAPER JAMED, WHEN I PRESS THE LIGHT BUTTON THE PAPER COMES OUT WITH NO PROBLEMS BUT LOSES THE PRINTED DOCUMENT.

->Clear any loose paper from the paper tray. This will help you locate the jam. You will find it either in front, near the paper tray, or in the rear.

->To clear a paper jam near the paper tray, grip the paper and pull it firmly but gently from the printer. If you find a stack of papers jammed, grab from the middle of the stack and pull.

->For a rear jam, remove the back of the printer. When you find a free edge on the paper, grip it firmly and pull it out.

->Replace the back cover. Press the "Resume" button or turn off the printer, and then turn it back on. Your settings should reset.

->Try printing another document

If you need any technical help on printer then you can reach at http://www.vtechsquad.com/

do you print CD or plain paper, red light is mean jamed paper or change cartridge. Open the top door >press drop ink symbol> look at printer head show on ink ink tray.

there would be little bits of paper jamed inside the printer, now wnen ever you tries to take a new print at that time the bits of paper blocks to come out..........just open the printer and clear off the papers

1)check properly if there is no paper jam, make sure all jams have been removed
it this doesn't work

2) Remove the paper in the paper tray and replace with papers tha do not have folded edges
Make sure you are not using a paper that cannot run smoothly through the photocopier (too light or too hard)

3) Also check if some papers are stucked under the paper tray.

let

This can happen a lot if you're using very light weight paper.  Also, if the paper is not flat it can jam up too.  Best thing you can do is get yourself some higher quality paper and keep it in a air tight tub after you open it.

just check to see if there is any obstructions were the paper is going through, unplug printer cables, press power button for 20 seconds without any cables connected, it will refresh printer memory, connect cables back,try photocopy, if nogo, printer fualty

problem with teflon sheat and pressor roller.Please replace the boath items.