Konica Bizhub Password Reset

https://printcopy.info/?mod=erc&brand=Konica-Minolta&model=bizhub+C350&code=C0521

Use this function to initialize protect passcode and administrator's password.
1. Press <Mode>, <*>, <6>, <1>.
2. Press either [Initialize Protect Code] or [Initialize Admin Password].
3. Press [Yes].

Press <Mode> about two seconds until you hear the beep twice.
When you press " * ", you will hear short beeps.

CHECK THE BELOW LINK:
https://www.uwyo.edu/auxserv/copier-services/konicaminoltahddsecuritymay2010compatibilitymode.pdf

GOOD LUCK

How To Reset Admin Password On Konica Copier

enter service mode stop 00 stop 01 and than enter sop 0 c and there it shows administrator reset just enter the paswword you likce.

sorry there is no service code 5353 in the c350 your sure???

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

You have must be entered in Tech.rep mode.
Press Utility key - Meter count - Check details - Stop -00-Stop -01 and select machine settings or system 1 or system2.
If you need to enter in Administrator mode the Minolta password is 12345678 or 00000000 and press Enter.For more details please contact me.

To recover/change the Administrator password perform the following;
1. Enter the Service mode.
2. Press STOP-0-CLEAR to enter the Enhanced security mode.
3. Enter Administrator Password setting, and enter new Password.

You can try the default admin password which is 12345678

Press the Utility/Counter button.

Administrator Settings - password is 12345678
Network settings
TCP/IP settings