Epson cx3810 printing blank copies

Inkjet printers need to be used frequently to prevent ink drying out and blocking the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages, then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer than replace the print head.

The printer driver must be set to print text with the K resin panel.
If the text is part of a bitmap image and not a true-type font then it will print from the coloured panels and be dark grey.
To create the correct green on the card you need to change the RGB values so it prints correctly but look wrong on the badge design program. Even different printers print the same colour differently.

is there an onboard test ? That may direct you to where the problen may be

dear friend

this is fault of the technology of Epson CX3810

it uses little bi of color ink everytime it prints black even though you have chosen use only black cartridges

thanks

If you are not using Epson ink, your printer will do this. Epson printers hate knock-off ink. Always use Epson ink if you want to keep your printer working properly. To solve the problem you are having, try cleaning the ink tubes. Make sure you re-install them properly. Hope this helps. Charlene

are the epson ARC chipsets available on office depot or big retailers?

kkmmmmmmmmmmmmmmmmmmmmmmmm

Did you remove the seal stickers from the cartridges before putting them into the printer?

Hi, I have question?
The ink that yuo are change are original epson cartidge ink?If yes , try to head cleaning twice and then nozzle check ,then the result of test print are soild in color are good , the unclean head having plenty spaces within the color in test print.

that same thing happen to me try to wipe the needle that the ink is on with baby wipes.