Firmware upgrade made dead player

Todd, first you give us enough information then we try to help!
what is it, make model #, etc and your complete question.
links below may help RE POST IF NOT HELPFUL
press the helpful button

How to Upgrade the Firmware on MP3 Player

Flash Drive Repair how to upgrade mp3 mp4 player firmware

http://www.moviecodec.com/mp3-players/installing-firmware-to-mp4-player-11573

How to Update the firmware for your MP3 MP4 player

I upgraded the firmware of my Yshica mp4 player model number DM 6000 (4GB). Now its display is not turning on & failed to work. plz help me..sirm

sounds to me like the firmware file has been corrupted, the included software for your player (MP3 utilities) should have a program called mp3 upgrade tool, which is used to load the firmware file to the player.

here is a site that should help you with firmware update

http://mympxplayer.org/how-to-recover-a-dead-mp3-mp4-player-vt10126.html

refomatting and reallocate the partition is the only solution

You'll need to open up your player to find the plate and board ID numbers to be able to find a compatible firmware for your player. Take a look at this post here: http://mympx.org/forum/knowledge-base-faq/41330-how-recover-dead-mp3-mp4-player.html. This will tell you how to recover your dead player using your firmware.

Hope that helps.

MP3 XINTAI Firmware. Please pass it to the other repliers at the forum, or anyone who needs it.

Hi pals.

At last!, I've backed-up the firmware for Xintai MP3 Player from Wilson Co. Ltd., and put it here:

http://www.paginasprodigy.com.mx/darkwing/Xintai9152_Wilson.zip

Don't worry cause one of the files (at UI30.RES) has an incorrect checksum. It's due to prior edit on ASCII labels.

I couldn't say it is really the firmware you want, so you must check and verify thoroughly before proceed.

Please note:
1.- Do not update or reload firmware if your player is working fine (more or less).
2.- If this firmware is not EXACTLY the same version, for the same chipset, there's no guarantee. The player could not work or, even worst, could suffer defintive damage.
3.- It's highly recommendable you BACKUP the existent firmware, despite damage suspects.
4.- To backup and/or restore firmware for this player, you can use "S1res" Ver 4.1, downloadable at:

http://www.s1mp3.de/tools.s1res.html

For restoring firmware, you can also use the "Player Upgrade Tool" Ver 4.18 or superior (part of "MP3 Player Utilities"), downloadable at:

http://www.mympxplayer.org

Enjoy your music.

---------------------------------------------

XINTAI MP3 Player
Wilson Co. Ltd.
Bootflash type: F285
brom version: 3.0.80
Firmware version: 9.1.52
Date: 9-01-05

VID: 10D6
PID: 1101

V9-device
giveio ver: 3.0
Flash chip: A514D3AD "HYNIX/SAMSUNG 1024 (LBF)

MTP Manufacturer: Auctions Semiconductor Co.
MTP Version: V1.00.3333
MTP VID: 10D6
MTP PID: 2200

----------------------------------------------

mp4 movies can;t play

If it is a "chi-Pod" or other generic MP3 player, youll have to get on google to see if you can find it, I dont even know if you can get a firmware dump off a friends same model.

sdsdsd

i have brought a new mp3/mp4{s1 mp3 player} player of 4GB.when ,i made a secert space with the help of mp3 disk tool.my memory of mp3/mp4{s1 mp3 player} player 
is decrease.Now it show only 108 MB.