Our office uses a panansonic kx-t7433 digital super hybrid system. How can I change the time on this phone

most phones have a call history, if it was a friend then look in the history for the phone number by matching the time of the call.

The manual (same as KX-T7636) explains that, and can be downloaded from...

It will only work on a telephone system , a panasonic hybrid system , KXTD or Kxtda

Hi,

Please visit http://service.us.panasonic.com/operman/findmanual.aspx?model=kxt7433

Thanks and regards,

Anil.B.R

Hi,

Please follow the steps below to set the time 

SETTING THE DATE & TIME:-

With handset down on main phone
Press ‘Program’
Dial ‘**0000’ or ‘**1234’ (system program no)
Dial ‘#000’
Press ‘Next’
Enter the date using the dial pad
Press ‘Next’
Enter the time using the dial pad
Press ’Store’
Press ‘Program

Thanx

I don't exactly see the question in this, but the TD system has FOUR manuals in the set IM, UG, FG and PG. The Installation Manual covers the hardware and how to install it, the Programming Guide gives the commands for programming the system from the main display phone, the Features Guide describes the features, and the User's Manual that you plsted tells how to use the features.

In addition, there's also an Installers software set and a few addendums for integration to voice mail.

Carl

An expansion card is 8 ports. It's possible that the 6 phones are on the same card and that there is trouble on one of the data pairs. Try to determine if the phones are grouped together by extension as in 117-124 or 125-132 and start disconnecting them at the phone system.

You'll probably find a bad jack, water, or a different phone plugged into one of the 8 ports that is causing the trouble.

Carl

It can be done. Need to know the model of the phone system

I just worked it out.

Press Program
Then **
followed by your passcode (usually 1234)
Then 004
Then press next till you find Mark
Press Shift then the button under Clr
Then enter the name so for Claire start with 2 and swing the jog button round till you get a C, then press 5 and swing the jog button round till you get an l etc..
If you make a mistake press Transfer
Then when you've got your name correct press Auto Dial.