HOW DO i RESET CLOCK FOR DAYLIGHT SAVINGS TIME, ITS INTERNAL CALENDAR DID NOT HEAR ABOUT THE ENERGY BILL. ROYAL TC100 TIMEMASTER TIME CLOCK

look at the instructions or just get a new one

send me your email i will give you the link you get it for free ; - )

Program the Date & Time and Print Method using the 3 buttons: Mode, Select, Setting:
Date & Time: Press the Mode button. The Hour will start blinking. Press the Setting button
until the correct hour is displayed. Press Select to set the hour shown.
The Minutes will blink. Press Setting until the correct minutes are displayed. Press Select
to set the minutes shown.
The Seconds will blink. To set the seconds at 00, press the Setting button. Press Select.
The Year will blink. Press the Setting button until the desired year is shown. Press Select
to set the year shown.
The Month will blink. Press Setting until the correct month is shown. Press Select to set
the month hope this help : - )

goto this web site and select model for pdf format of manual

http://www.royalsupplies.com/drivers_manuals.htm

rob

I need to know how to adjust the timeclock to make it punch in/out on the proper line, thanks

Wantitall have them

http://www.wantitall.co.za/Royal-IR-40T-Ink-Pack-for-Model-TC-100-Time-Clock-2-Pack__B0001D7NZG

Remove the top cover. You should see a little black tap that says pull up (the ink roll), do so. Then pop your new ink roll in. Replace cover.

Phone: (732)627-9977 CALL THIS NUMBER THEY WILL HAVE ALL YOU NEEDRICHARDM69

Go to: http://www.royal.com/drivers_manuals.htm and towards the bottom of the screen pick timeclocks and the model (TC100). If you have a Pop-Up Blocker, hold the <ctrl> key down while choosing the model. You will get a new window and there you have a 22 page manual on how to set the time and replace the ink.