ERROR 026 ENTRE CONDIMENT PREPARACION PLU - Casio Te-900 Electronic Cash Register

I'm guessing this is a Casio register in which case you have programmed a condiment to a PLU (item). You need to check your manual in PLU programming and find the codes to set condiment PLU to no or set a zero in that part of programming. if you don't have a programming manual, you could try checkout tech. https://the-checkout-tech.com/manuals/cashregisters/Casio1.php
They give free help if you get the manual through them so they can point you to the right codes and links in the manual to clear it. hope this helps

This is computer desktops, not the correct category, you need the category that covers cash registers.

Manual:
http://totalpos.co.nz/wp-content/uploads/2012/10/TE4000F_E.pdf

says:
E026 No condiment/preparation PLU is registered

Solution:
Register condiment/preparation PLU.
See page 88 of the manual how to do this.

The PLU has a condiment or preparation PLU association. It needs to be told which PLU you are linking. For example, a PLU set for steak may need to be told the PLU for medium rare or well done. Otherwise, you need to use the codes to turn off the condiment/ prep link from the dealer manual. If you need it, one of the users has the manual here:
http://the-checkout-tech.com/manuals/cashregisters/Casio_TE-2200_and_TE-2400_dealers_manual.html

You have set that item to be linked to a condiment/ prep PLU which means you set the wrong digit during tax linking. go back and turn the condiment/ prep PLU feature off

Brand and model?

You have set that PLU as a condiment PLU while setting tax status for it I'd say. Check the setting for condiment and turn it off.

Hi. You have been given the wrong instructions. That is why it is now all screwed up. Pricing is dead easy. You have condiments setup because you have set key features in prog 3 mode. It shouldn't be too hard to fix. We'll start with prices: Turn key to Program mode Type the price (no decimal point) Press a PLU (item button) to set the price to. Press SUBTOTAL To remove condiments, you need prog 3 mode. While key is on program, press 3 then SUBTOTAL. The display must change to "P3" Now press 0 (zero) then one of the PLUs that has condiments set. Press SUBTOTAL to finish. It may remove the tax status, so turn back to REG mode and test the PLU. If the tax has gone, then reprogram the tax setting for that PLU. Let me know if you get stuck. Mark

find out what plu it is then re pgm it

turn the key to PGM
enter 3 & press Subtotal
enter 0166 & press Subtotal
enter 0 and press the faulty PLU
now press Subtotal

enter 1066 & press Subtotal
enter 0 and press the faulty PLU
now press Subtotal
turn the key back to Reg

Go to page 72 of the attached link and you will have your answer. It is too lengthy to type here and you need to do some printouts first. So it would be easier for you to print the manual and look at the department PLU and reset them on your own.

The manual can be found and printed from:

http://www.casio4business.com/sa/products/downloads/manuals/PCR-T2000_E030326D.pdf

If for some reason the link does not take you to the site, copy and paste it into the address line of your browser and hit enter

Please remember to rate this solution.