Is emachines T3504 wifi enabled? - T E-Machines Computers & Internet

You'll get several answers if you Google
"how to install another hard drive in pc"

check if you enable wifi. some netbook you need to enable or turn on the wifi by pressing function key the wifi button. also check if the device driver is installed properly.

try replacing your hard drive. the do the restoring again.

I found your drivers here. http://emachines.com/support/drivers.html

Is their files that need to be retrieved from the computer? If you were doing a restore they would be lost. You have other options. Your best option is to just purchase a copy of windows xp and install a fresh copy of windows. you will still have to find the drivers on the internet and download and install the. All of this work should really be done by someone who is computer savvy but its really not that difficult.
Let me know if you have other questions.
Thanks,
Lee

The problem is not one easy... The IC with controls system is down... sorry but u must go to an expert to fix the bug! Rate me if this help's you Thanks!

your drivers are available here : http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=T%20Series&model=T3504
make sure you dowbload the drivers correct for the operating system you're using as both xp and vista are there. download them to your desktop so you can find them to install.. install..reboot if prompted..
also make sure to remove any entries in the device manager that have a yellow ! or ? next to them before installing new drivers..
The device manager can be found by clicking START-CONTROL PANEL-- double click SYSTEM-select the HARDWARE tab at the top- click on device manager..
Regards...

its the monyor cord defective u if u move it it will show color olz replac it

You may need to uninstall your current usb's and let Windows redetect them.

click on START, SETTINGS, CONTROL PANEL, SYSTEM. Click on tab HARDWARE, click on DEVICE MANAGER. Scroll down to UNIVERSAL SERIAL BUS CONTROLLER. Delete everything there. Click on ACTION, SCAN FOR HARDWARE CHANGES. It should redetect and you should be good.

You need to get into your BIOS. Go to CPU information. Highlight hyper-threading and enable or disable. Save and restart.