same as melindapaines - E light flashing, all green light flashing, two red lights on.same as melindapaines - E light flashing, all green light flashing, two red lights on.
Printer indicated that the yellow cartridge needed changing, I changed it then the two red lights came on and all the other red flashing lights. what now?Printer indicated that the yellow cartridge needed changing, I changed it then the two red lights came on and all the other red flashing lights. what now?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The flashing green light on your Epson Stylus CX3600 printer is indicating an error with the ink system. The error message you mentioned, "not to press the ink button unless the green light is on and not flashing", is likely referring to the ink button that is located on the side of the printer and is used to reset the ink levels.
To resolve the issue with the flashing green light, try the following steps:
Turn off the printer: Turn off the printer and disconnect it from the power source.
Clean the ink cartridges: Remove the ink cartridges from the printer and clean the contacts with a soft, damp cloth. Make sure not to touch the ink nozzles or the copper contacts.
Check for clogs: If the problem persists, check the ink cartridges for clogs and clean the print head.
Reinstall the ink cartridges: Reinstall the ink cartridges into the printer, making sure that they are properly seated.
Turn on the printer: Connect the printer to the power source and turn it on.
Check the green light: Observe the green light and make sure it is no longer flashing
The SSC utility will allow you to reset the waste counter on this printer... You may find that this is a general error though in which case resetting won't make any difference.
WWW.EPSON.COM/SUPPORT AND DOWNLOADS, WHEN YOU FLIP OPEN THE COVER SEE IF THE UNDERSIDE HAS A INSTRUCTION APPLET ON CLEANING AND REPLACING INK CARTRIDGES, THOSE LIGHTS MEAN 2- THINGS RED-LIGHT, INK IS TOO LOW,NEEDS REPLACEMENT, RED WITH GREEN AFTER REPLACEMENT CLEAN HEADS, I HAVE SAME PRINTER , NOTHING MAJOR, USER GUIDE IS ON SITE ALSO IN PDF, FORMAT.... JON T
It appears that this is an overseas model (at least for those here in the US that is) as far as I can tell. This will use the same drivers as the CX3600 model though. Depending on how long you have had this and how often you use it, you may have a waste ink reset situation. While I have not had any personal experience with this model, there are several references on the internet on how to do a reset. There is even an "SSC Service Utility" you can search for that lists this printer as being supported. It cannot reset the ink counters but it may reset the waste. Good luck, I hope this is of some help.
Every time an Epson printer "cleans" itself, it dumps ink into "waste pads". The printer counts up how much ink it has put in those waste pads, and will stop printing when it believes the pads are full. You may be able to reset the counter with software. Google, "epson waste counter reset" for ways to do that.
same as melindapaines - E light flashing, all green light flashing, two red lights on.
Printer indicated that the yellow cartridge needed changing, I changed it then the two red lights came on and all the other red flashing lights. what now?
×