Print page problem

well it has got to be the ink cartridge. wipe of the bottom of it and make sure black ink shows up

Why don't you just print the data on the one side of the page and then simply turn the page over and reinsert it into the paper feeder and then print the next bit of data, therfore you end up with both sides of the page printed without worrying about printer commands that seem to fail.

Give this a try.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114788&cc=us&lc=en&dlc=en&product=2512009

the software is the problem try updating it or download a new driver from canon

hi jcruisedirec

Test print shows that there is no problem with he printer.
Do this:

Type just one or two words in a new document and try to print. Before printing, look at the print setup and make sure you have the correct printer name selected.
Also when you go to print, there are few options like:

• Print All
• Current page
• Pages
• Selection

If you attempt to print "selection" without actually selecting a certain portion of the document, you get blank page.
So first check that the correct name of the printer is selected.
Then test printing one page
Hope this will help you. Good luck.
If you find this helpful, please give a rating
luciana44

If the printer starts to print and stop in the middle check the eletricity of your place, this may have a variation. If the printer prints a half page and give you the paper, with no jam, check the cartridges and then the main board.

It seems the printer buffer memory has overflowed. Cancel the print from the print Que and switch off the printer. Give your PC a reboot too. Now switch on the printer and make sure that there is no document in the print Que. If its still there, disconnect the printer and delete the pending job, i.e. print Que. After the printer shows it ready for printing do not release the entire document for printing at one go. Breakup the print job in 3 parts and for each part manually enter the page numbers and then give the print command. Repeat this till the entire lot is over..........................sodeep

my printer hp psc1315xi all in one printer copier, scanner will not print any documents, not even a test print, there is also a doucument in it that am not able to delet from the printer

if your taskbar displays printer icon on system tray double click on that & delete all privious prints.

select the text or area which you want to print. & give print command, & Click on print selection button & then Print.