USB Data Cable Driver Samsung M300

If it is network locked, you can remove it using unlock code, you can purchase such code from any vendors online like
http://www.superunlockcodes.com/samsung-m300/rs5wp9

I believe your device or Phone is a Samsung. You can download the driver from th link below:
http://www.giveawayoftheday.com/samsung+e2510+usb+cable+driver+v2.0/

If after installing it still doesn't work, then you have to change the data cable.

Cheers!

You can get the Unlock code from Online sites..

If you are looking for drivers for moving, adding/removing pictures or mp3's try this.


Transfer MP3 to M300 without driver

1. While in standby mode, plug in the USB cable to the handset and connect it to a USB port on your PC
2. While in standby mode, press the Menu/OK key
3. Select Tools (9)
4. Select Mass Storage (1)
5. Select Connect to PC (1)
6. The handset should display the message, Connected to PC & Call Disabled
7. Open Windows Media Player 10 on your PC and select the SYNC option
8. The left-hand side of the Windows Media Player will display the files on your PC, Check the songs you want to download
9. Press the Start Sync button on the upper left-hand side of the Windows Media Player
10. A Synchronization Complete message will appear on the phone when downloading is complete.
11. To return to standby mode, press the left soft key for Done then select Yes (1)
12. Disconnect the USB cable from the handset & PC

Transfer Pictures and Video without driver

1. Insert a microSD memory card into the handsets microSD card slot Connect the USB cable to a USB port on the PC
2. Insert the remaining end of the USB cable into the handsets power interface connector
3. If necessary, complete the [Found New Hardware] wizard on the PC (The PC will display [New Device Detected] and a new drive letter will be assigned for the handset)
4. While in standby mode, press the Menu/OK key
5. Select Tools (9)
6. Select Mass Storage (1)
7. Select Connect to PC (1), if the handset has established an active connection to the PC, the LCD will display [Connected to PC & Call disabled]
8. Browse to the file(s) location on the PC & copy the file(s)
9. Open the new drive letter (Removable Disk) for the handsets memory card
10. Create a folder named DCIM then create a subfolder within the DCIM folder named 100SSMED
11. Paste the file(s) into the DCIMs 100SSMED folder
12. When you have copied & pasted all desired content press the left soft key for Done
13. Select Yes (1)
14. Disconnect the USB cable from both the PC & handset
15. You will now be able to view the file(s) from the microSD memory card

Or if you need the driver for other reasons I managed to find a link that works and is free for you. :)

Just Click >>>HERE<<<

Hello,

Below is a detailed solution to your problem;
STEP 1.

Most mobile phones nowadays come standard with a USB data transfer cable and bundled software utility. Check the box that your mobile phone came with for the cable and CD-Rom. If not provided with the software, it may be available as a free download from the manufacturer’s website.
STEP 2.

Once you have located your software CD, check the system requirements necessary to run the software such as hardware specifications, operating systems supported etc. Install the software following on-screen instructions, but do not plug in the USB data cable or phone in just yet, unless the software requests you to do so during the installation process.

STEP 3.

Once the installation is complete, the software would usually require a reboot of the PC before plugging in the mobile phone for the first time. Then connect your mobile phone to the data, and the cable to the USB port of your PC. Several phones may display a message on the mobile display that the phone is now connected to the PC, but if not don’t worry just yet!

STEP 4.

Once connected, start up your mobile phone’s software, and browse through the interface. Most manufacturers offer some form of phone browser where you can browse through the content on your phone, copying files onto, or taking files off the mobile. The software utility may also offer a separate tool for transferring photos and video shot with your mobile, if this is the case use the utility!

STEP 5
.Use the software’s browser or photo utility to transfer your photographs to your PC. Some software tools provide image editing tools as well that will enable cropping, rotation, and sharpening of images once transferred to you PC. Don’t be afraid of referring to the software’s help file incase you get stuck.
The above guide will be of great help to you,as a note of warning;Remember never to unplug or disconnect the data cable from the phone during a data transfer or you could end up damaging your phone or loosing all your data.


Thanks and take care

you have to install CD usb data transfer first that came with your phone... good luck

u should install samsung cd

a USB transfer cable. or memory card.

ok well my mate told me this lock code but it only works on samsung phones like ours if they are already unlocked.trust me,i tried it on a phone that was locked.didnt work!
Ok so all u have to do is open ur phone and ur screen saver wil come up as normal lol.
push these dijits; ##3282# it will then go into this thing that says 3G Data Prog, egnor all that and push 5 then enter the pin 726300 then select view and keep scrooling threw till u find ur lock code!!!!!!!!!!!! wow!!!!!!!!!! it works

change it to mass storage and then just download the disk and use the cable