How to setup scan to pc on Konica minolta bizhub 350 Error ED09C7

Does it print?, Can you ping it. Scan to Email or PC? Or SMB/FTP? Check mail server. also try this site


Self Help Product Support Konica Minolta Business Solutions Inc

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

check that every one has a pin code??? is the folders on all computer shared.

try this site


Self Help Product Support Konica Minolta Business Solutions Inc

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

have a bizhub 250 trying to scan to pc via smb on a network. Keep getting login failure. Can you help

this means the computer name and or passwordare incorrect when creating the one touch key in the user name and password fields the user name and password must match exactly to the name and password on the pc

Reinstall print driver to the PC using same ip address and print test print. next the same procedure go to web browser enter the ip address and choose administrator and the password 12345678. all your question will be in that area. scan, printing and network.

HH

Your laptop is not configured properly to the network. You forgot to mentioned what type of scanning. ftp, smb, scan to email scan to box. But any way your IT can help you with this problem. If not I will email you the step by step to configure you laptop.

You are getting a failure sheet. This happens when the scan doesnt go through. I think you are reffering to SMB scanning, which needs to have the following setup on both the MFP and the copier.

Host ID or NAME - IP address or hostname with DNS resolution.

Share Name - This is your SMB share name or folder share name on the remote PC

User Name - This is an account that is configured on the remote PC

Password - This is the password for the account setup on the remote PC.

Some things to keep in mind: Third party firewalls can block the bizhub from writing files.

Set share permissions to full control. (under sharing tab> permissions buttion)

Set NTFS permissions to at least write access. (if you have a "security" tab on the shared folder.

Or, you may see something like "allow network users to change my files" on the sharing tab. This basically does the same under different configuration scenario.

One last thing. If you havent changed anything since the problem started, it is probably just something like an expired password on the account that is setup for the copier.

Good Luck.

in smb server, create a folder and give all rights, to that folder, if youre in domain, it may need you to use a password, so create a user and password and give rights that user in folder then go youre printer ip address, and add a contact, choose smb and fill in the fields. if error occurs, then choose details and you see whats wrong

I don't know if SMB for a Mac is supported on Bizhubs. I know it works with Microsoft workgroups. The only other way to get around it is to scan to e-mail. Then retrieve the e-mail from a Mac.

Hello, I have the same problem wih a Bizhub 500 and samba on SLES 9