Clock shouldn't lose time if it is receiving time signal. Do you have the signal indicator showing? If not suggest you take the batteries out and reset the clock, making sure that you do not set a time.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had this exact same problem on a hipster 125, it was a faulty regulator module ( mounted under the seat) I also found a short circuit (somewhere) in the wiring loom between the regulator output and the chassis (probably what killed the regulator in the first place!) I cut and replaced the entire wire to save removing most of the loom and after testing reg to ensure it was dead i fitted a new one (about £60) bike charges and runs like a dream now even with fully lights approx 80% of the time. good luck
Check in the instructions about the time zone setting and that the feature for auto day light savings are turned on.
If you go to the manufacture site for many of these watches, they have downloadable PDF instructions. They also have service centers that can give support.
×