I have no remote and i want to put it on to the av channel

While ur TV is connected to d AV device which must also be on, run a frequency scan and all available channels including ur AV channel will be detected and saved. After d scan, u can manually change channels to ur AV choice.

Depends on the kind of clock we talking about but in general terms put the batery into the clock and u will c the tuner kp tuning till it matches wt the one in ur hands

put a dvd on the tv and it will automatick change the chanell gor you

input button on the front panel of tv. Or on remote, or below channel 2 will be av.

Try to change the channel by manually putting the numbers in with your remote. If this works then you probably need to program your channels.

Hi
If you cannot reach the AV input mode by scrolling through the channel up down, nor is there is a source or TV/AV button on the set it self, then the news is bad I am sorry. You will need the remote to get AV inputs on this set.
You can get a new remote for the set from here for $1995. Plus postage. Note that it has the TV/AV button.
Happy to answer any questions you may have.
regards robotek

push channel down button through the channels, then it will go into av mode(video) by just keeping to press channel down. it will be channel below channel 02. just keep pushing channel down button

very sorry for that but you can be changing channel manually on the tv channel buttons, if you sweep on all channels you can go to AV from RF channels, that is before you buy a remote.

try to buy your remote from

www.ebay.com

I dont know if you tv has this sertting but click menu usally 4 times and it will bring u to a page wich might say channel or something else and u can chane the channel by using the volume buttoms this worked for me and i can put it onto av1 av2 av3 and av4

est1964-I am guessing that your tv is a duabrand, did you try to put in 00 as a channel alot of tv's use this as AV input,if not try to channel down to AV mode this is fairly common.Try that out and let me know,maybe we can figure this out. cooltek Feb.18/08