I want to make my Phillips FWD876 dvd player region free.

Not possible. DVD to MP3 is a transitional change using a software program like that from Wondershare.

Here is the steps to make your dvd player region free:

1. get the system grid to change region.
2. change to region 2 first.
3. then change to all regions.

Part 1 -> Getting to the grid
make sure the disc tray is closed
press buttons below one after each other
1) Repeat
2) Fast Reverse (3) Next Ch (>>')
4) Fast Fwd (>>)
5) Prev Ch ('6) Play (>)
Take a note of the highlighted numbers (just in case!) in
case you need to do it all again.

Part 2 -> Change player to region 2.
Using the grid make your player into region 2 by
highlighting the numbers 2,8,19,21,22,24 then PLAY button to
save settings(this will turn your player off - you need to
turn it back on by pressing power button

Select the language again then proceed to part 3.

Part 3 -> Change player to region 0 (all regions)
Press the following buttons:
1) Repeat
2) Fast Fwd
3) Fast Rev
4) Fast Fwd
5) Up
6) Down
You should see a 0 on the top left corner!!!

Player is now REGION FREE.

Hi, kindly get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__edr45

this sounds like pal and ntsc issues um what dvd you use ones from retail walmart,bestbuy ect or homemade dvd movies ?,try different brands of dvd ,try to go to the options on your dvd player and set it to ntsc if not try to clean the lens also ,hope to hear from you for more help.

To change the Region code on your player, open Control Panel - System - Hardware - Device manager, and click on DVD/CD ROM drives, then right click on the DVD drive and click Properties then click on DVD Region.
You can enter a new region and it also shows you how many changes have been made.
NOTE you can make only 4 changes and the player will lock permanently on the 4th change.
If you want to play DVD from any region you maybe able to upgrade the firmware to make it region free BUT if you make a mistake or installed the wrong firmware the the player will be a piece of junk.
The best solution to make the player region free is to install a piece of software that allows you to play DVDs from any region. There are several available on the Internet but my favourite is DVD-Region Free from ;-
www.dvdidle.com/dvd-region-free.htm

Have fun, let me know if you have problems

This sound as if you've got a Local region programed DVD.  (India is not NTSC) However you can try playing a different region and fiddle with the remote. In must cases it should be in automatic. If this doesn't work then you nee a multiregion apparatus. Good Luck

1. Open the DVD cover
2. Press setup
3. Type 9 6 5 3
4. Press the Arrow Key up or down and select 0 for region free
5. Hit OK

to play discs from different regions on HTS3548:

Before you begin, ensure you have connected your DVD player to your TV and both have the power on. Once you have connected the TV, follow the instructions below.

-- Open the disc tray
-- On the remote control, press in sequence:
Disc Menu
Stop
7 3 4 4 6 6 0
OK
-- Make sure Region 0 is showing on the TV.

This should hopefully help!!!!

Hi,

I'm living in Brazil.
I have a Home Theather Systems Philips Model HTS3565D and when i put on a DVDs show me in display Wrong Region.
Here in Brazil the DVDs are 4 Region.
Can you help me to modify in Remote Control the Region for 4?
Thank you very mych!

Elaine

Put DVD into player - wait for regional code violation screen to appear. Once this happens press the M (Memory) button on your remote control. Then press 1 for Title 1 and press play on the remote. This will over-ride the regional code violation detection menu and you can watch the movie etc by entering the fwd on the remote control and change chapters etc by using the T (Title/Chapter) button on the remote control)
I found this for other Toshiba SD dvd players, yours was not listed but might be worth a go.