Can't get my computer to discover my s9 headphones. There are no other BT devices connected. The blue light is on...

uninstalled the rom

bad idea that.! why mess with ROM. ouch.

test the PC on other BT devices, if it works then the PC is good.
even a BT head set, mouse, or any other vast numbers of BT devices, (not apple sure)

first you have to pair your blue tooth device to your phone,first you turn the bt power to on on your phone menu,next you have to put your blue tooth device headphones into discovery mode,now most bt manufactures use the power button for this feature,by holding the power button down for 6 to 10 seconds when you turn the bt device on it usually puts the bt intodiscovery mode.a solid light usually remains on on your blue tooth device,then you can search or add new device from your phone menu.once they have paired or recognized you will need a pin pairing code.Most manufactures of blue tooth devices use a factory 4 digit pin pairing code ,they are as follows0000,1234,9999,or1111 i hope this helps

how to charge and switch on Motorola S9-HD wireless headphones...please help me

make sure you charge the S9 using a motorola mini usb AC charger or a mini USB cord plugged into a live port.
press and hold the circle vertical bar until the light is steady blue and pair it with your bluetooth device. you only have two buttons at the rear of the device under the motorola logo.

Blue (three flashes) powering on/enabling indicator light

Blue (steady) pairing mode

Blue with 10 quick purple flashes
pairing successful

Blue (long flash)
standby (connected but not
on a call or streaming music)

Blue (quick flash)
incoming call

Blue (long pulse)
on a call

these are all the normal blue flashes that the s9 makes

when the red light is on while charging it means it is at less than 25% charge let it charge until the light is green
then tryy connecting it to the computer

please connect the wires correct ant check that the wires are twisted and make straight

When using your S9 for the first time, follow these
steps to pair (connect) to your Phone:
Important: If you are pairing separate Bluetooth
devices for handsfree calls and streaming music, it is
recommended that you pair your S9 with your
handsfree device (phone) first.
1 Ensure the Bluetooth feature is enabled (turned
on) in your phone.

2 Turn on your S9 by pressing and holding (|) button
until the indicator light flashes three times in
blue.
After a few moments, the indicator light will be
steadily lit in blue to indicate your S9 is in pairing
mode.
3 From your device, perform a Bluetooth device
discovery/search. .
When pairing your S9, use
the following steps to perform a device discovery
from your phone:
After accessing the Settings Menu, go to bluetooth.
to add a new device, tap [New].
1. Tap [New] key to search the device that can be connected and which is
within range.
The phone lists Bluetooth devices it
finds.
b Select Motorola S9.
c Select OK or Yes to pair your S9 with
your phone.
d Enter the passkey: 0000
e Select OK.

When your S9 successfully pairs and connects to
your device, the indicator light displays blue with
10 quick purple flashes. If wearing your S9, you
will also hear an audio tone indicating successful
pairing and connection to your device.
4 To verify your S9 has successfully established a
handsfree calling connection with your phone,
dial a phone number you want to call and press
the Send key on your phone.
When successfully connected, you hear ringing
on your S9. A Bluetooth Handsfree Phone (HFP)
connection is now established with your phone

From Falvey86: Hold the headset start button for about 10 to 20 seconds, the lights will start flashing red and blue, then the search for Bluetooth devices from phone and it will appear as: S9. press "connect", a window will appear, place the password "0000", that should do the trick!!!!

Try 0000 this is standard manufacturing default code for nearly any blue-tooth device that has security feature enabled and because the moto s9 as far as i can see has no way of being able to change this code it must be still at the manufactured setting