Can't program remote control na270 to record future programs
SOURCE: remote control not working and need programming code for cable television/universal remote control
remotes.com says oerseas item-not available?
SOURCE: Panasonic DVD Recorder DMR-EX77
Hi,
It sounds as if the actual T/V channel is out of tune.
I,d suggest powering the player On.
Then using channel 8-12 on the T/V to Scan for its frequency.
When you,ve located it to the Player.
Lock the channel, then use the DVD on Channel 8-12.
Mike @ compurepair.
p.s also check the output from DVD To T/V lead has,nt come loose.
SOURCE: Programming Remote Control
here is a link to the codes you will need;
http://www.comcast.com/MediaLibrary/1/2/CM/VanityURL/documents/comcast_on_demand_remote_manual.pdf
hope this works for you
please give good rating
thanks
tom
SOURCE: Program a remote control
you can only use the original remote control that goes with that Go Video unit. because its a DVD/VCR combo remote there are no universals that will program to work it.
232 views
Usually answered in minutes!
×