A reset code for an Alpine Kia Logic Control Model AUK 8625

We will need more info on your question about logic control on your Kia.If your computer is loosing memory once you shut off the key,it is almost always a corroded/broken wire near/in the fuse box.(green color wire)

Good day and welcome to FixYa!
The radio has it's own memory which is powered by the car's battery. I strongly suggest that you remove the positive battery connector and leave it for atleast a minute then put it back on. This will reset the stereo system. Try punching in the code again.
Hope this helps and thank you for using FixYa!

just call t5he dealer where you bought it they will give you the code over the phone once you give them your vin#

I need the code for alpine radio kia logic control
model no : auk-8625

Sorry...this code will only be available from your Main Dealer or a Radio Decoding Service

Sounds like the receiver portion of the logic board has gone bad.

(11)--"A"camshaft position timing over-advanced or system performance bank 1++ ( 21)-- "A"same as above but bank 2 ++(24)--"B" same as above but bank 2=== check ur wiring and connections to ur oil control valve and solenoid and power control module also check ur v v t/v c t variable valve timing /variable camshaft timing circuits

If this is the model fitted in a TOYOTA then the code is only available from the Main Dealer or a Decode Specialist (or your local Car Radio / Audio Store) who will connect a laptop to read/recode the memory chip

You may just got a bad control logic board our a bad service capcitor inside, You may want to have it looked at by a Technition in your area I am sure you can come to a solutin to this problem.

I take part of my day answering free questions hopeing you will give a good rating if you could that would be great. Thanks

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

I have an 8625 and the button is now white not red. Probably fadded. Thanks that was the reset button and it solved my problem.