How do you remove stones from the grinder of a jura capresso E9 machine?

http://www.capresso.com/parts-accessories.html



Parts Accessories

I think water dropped into electric parts and now something burn out...no suggest, just send them the coffe maker

You need a new drainage valve on the base of the brew unit.

Hi, a video how to fix your Jura step by step, good luck... http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Use a pin or a needle on the spout to clean the nozzle head. Most of the time this is due to useing to fine a grind in the machine. You may have to clean the head this way more then one time to get it to start working again properly.If you have any further questions message me back.
Thank you
Rick

You can find the Jura manuals here:
http://www.capresso.com/customer-care-instruction-booklets.shtml

Hi, I made a video how to fix your Jura step by step, good luck!
http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

You can find some detail procedure in this tip below
http://www.fixya.com/support/r5713182-jura_capresso_impressa_f9_malfunction_8
Try it since it have help some other with same problem.

I had a similar problem, and solved it by turning the grinder by hand against resistance. Apparently the grinder wasn't really turning during the cycle and needed to be cleared. If your beans are "hopping" this may be a different problem.

Hi there,
check out this link:
http://capresso.com/pdf/inst_e_series.pdf