Leappad 2 was washed in water, everything works except the power button will not turn it off and there is moisture behind the screen..how do I fix it?

on a tablet it is normally screen damage. Or this

If the LeapPad does not complete the shutdown process and the white dot remains on the screen for more than ten seconds, complete the shut down by pressing and holding the power button on the LeapPad for ten seconds. This will fully power the LeapPad down, and it will start up normally next time you power it on.

LeapPad will not completely power down, white dot remains ...

..

During a normal shut down, the screen image on a LeapPad will reduce to a white dot, which will disappear in five to ten seconds.
In rare circumstances, the white dot will not disappear and the LeapPad will not fully power down. If the LeapPad does not complete the shutdown process and the white dot remains on the screen for more than ten seconds, complete the shut down by pressing and holding the power button on the LeapPad for ten seconds. This will fully power the LeapPad down, and it will start up normally next time you power it on. For more information contact essay writing service reviews
Essaypaperreviews com Best Writing Services Reviews online

This site is worthless...more interested in tricking you with AD links than giving you an answer. Press Volume Down, Home and Right Directional...then power on. Connection screen will appear, connect it to your PC and select repair after tune up is done.

Then delete your profile on here and report the link you followed from google as worthless.

place it in a small container of rice for about 3 weeks,to absorb moisture.then try it out.

I have the same problem. did you ever find an answer???

Sounds like a stuck pen button or the pen wire is pinched (look in the battery door at the pen wire).
Although it very well could be something (spilled) in the power button.
Don't take it apart too far.. once the membrane on the touch screen is disturbed or taken apart, it'll never work right again!
For a whole replacement leapPad, try a thrift store. I see them all the time, all models, under $20, sometimes under $5. (I have a 4 year old son and he destroys everything!)

If your device gets covered in water, act fast and rationally, and you may be able to save your device.

1. DO NOT TRY TO TURN IT ON
2. Pull out the battery.
3. Please your device and battery into a bowl of uncooked rice to absorb any moisture.
4. Please it in a warm, dry place where it can receive direct sunlight.
5. Be patient. It is recommended that you leave it in there for at least 48 hours.
6. After 48 hours, put the battery back in and power on.

you can take the battery and the back off the device and place in completely submerged in a bag of white rice and leave it in there for 1 to 2 days this will help absorb the moisture, this should fix it if the water did not damage the circut boards if the water damaged the circut boards then the device is fried

your lucky the phone turns on - it is water damaged - if you want to fix it try to buy a broken one from ebay to get the parts.