ORANGE OR RED VERTICLE LINE DOWN RIGHT SIDE OF SCREEN?

Hi,

IF YOU HAVE A SOLID BLACK LINE RUNNING VERTICALLY THEN YOU HAVE A FAULTY MATRIX INVERTER. IF CENTRAL THE MAIN VERTICAL INVERTER NEEDS CHANGED. LEFT = LEFT VERTICAL INVERTER RIGHT=RIGHT.........

ANOTHER WAY TO GET THIS FAULT IS WORN OR DAMAGED RIBBON/PLASTIC GOING FROM THE SCREEN MATRIX TO THE INVERTER

HOPE THIS WILL HELP TO FIX IT.....

sadly no.
either your panel has been hit and damaged or the panel itself is failing.
without some sort of warranty coverage, your repair cost would exceed the price of replacement.

This problems is not causes by a person or some objects by hitting ur LCD tv picture screen panel?If,yes,by a person or an objects by hitting the picture screen panel.This tv is not repairable only can be by replaced the whole entire LCD picture screen panel only,sorry than this tv is not worth repairing.Because by replacing the tv LCD picture screen panel itself,will cost the same as a new tv.If these colors strips show up by itself,yes,tv it is repairable.The board call the T-Con decoders board is dead.This board sit right at the bottom right in the middle of the LCD picture screen panel.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish T-Con decoders board for the replacement.

If there is no auto dimmer on the TV, than the TV needs professional repair work.

need to replace main board. it can't be repaired. check vizio parts web site for availability
Usually, they good with parts supply
Take care,
Alex's TV Service,
Philadelphia,PA.
215-806-5980..

it could be jusr a bad connection on th LVDS cable or your panel has died
have a tech check it out or send it to Tops Electronics in Haverhill ma

You will need to replace the control board and your TV will be better that a new one.

I would have a tech come out and look at it. Sometimes the ribbon connectors from the upper or lower buffer boards have poor or corroded contacts. Should'nt be a major deal since it comes and goes.

The panel is almost certainly bad. The only fix for this is to replace the whole panel which would cost more than the whole TV.

Press the Menu Key on your remote. If your menu shows clearly on the screen, then there is a problem with your source.