Code for Vizio tv

Wholesale VIZIO DPS-200PP-190 2950318703 POWER SUPPLY UNIT ,cheap price ,and orginal board ,good quality
https://www.abctay.com/vizio-dps200pp190-2950318703-power-supply-unit-p-1644.html

Log on your universal remote controls manufactory's website, search the model of your remote control (the model number is ether printed on the remote control face bezel, or inside of the battery compartment), then you will be able to download the user's manual, and find the code, or do a code search.

Universal remotes are hardly universal.

Google the model number of the remote and also the set to locate possible codes----also most remotes have a search mode where you can try each and every code in the remote (most have about 50 possible codes) to see if any will work for the set.

An original remote is always the best choice.

The instructions on letting the Hipi remote to seach for the code that came with my remote are not correct. I used the instructions from HOWTO.COM and printed below. There are two changes from the printed instructions. The first is to push the <TV> button after the <Code Search> button. The second is that the <Enter> button saved the code not the <MUTE> button.

Instructions
1
Turn on the Vizio TV.
2
Aim the Jumbo Universal Remote at the Vizio TV and hold down the "Code Search" button on the remove for roughly 3 to 5 seconds. The LED lights on the Jumbo Universal Remote will come on.
3
Press the "TV" button at the top of the Jumbo Universal Remote.
4
Start pressing the "ON/OFF" button repeatedly until the Vizio TV turns off. (This took only a few tries for my Vizio TV)
5
Press "Enter" on the remote immediately after the Vizio TV turns off to save the code.
6
Test the Jumbo Universal Remote by trying to control the Vizio TV with the remote. If the control doesn't work with the remote, repeat the entire process.

Hi
Setup codes for Shart TV with Vizio universal remote control are:
0093, 0688
OK.

A remote is not designed to control and Moitor. They only run by the video/sound output from the pc. So I am taking it for granted that you meant TV instead of Monitor.

A. Before buying a new remote try replacing the batteries first.

B. I found the Innovage Jumbo Remote Control manual and it has no code for the Vizio TV, you will need to utilize the remote's "Code Search" option.

C. Instructions

1. Turn on the Vizio TV.
2. Aim the Jumbo Universal Remote at the Vizio TV and hold down the "Code Search" button on the remove for roughly 3 to 5 seconds. The LED lights on the Jumbo Universal Remote will come on.
3. Press the "TV" button at the top of the Jumbo Universal Remote.
4. Start pressing the "ON/OFF" button repeatedly until the Vizio TV turns off. This will likely take several minutes due to the amount of available codes.
5. Press "Enter" on the remote immediately after the Vizio TV turns off to save the code.
6. Test the Jumbo Universal Remote by trying to control the Vizio TV with the remote. If the control doesn't work with the remote, repeat the entire process.

Good luck.

need code for universal vizio control

I contacted Vizio the other day. They tell me that they use the same generic codes as LG. I have Suddenlink Cable, formerly Charter, so I still use the Charter remote. My remote only needed 3 digits and I have noticed that many need 4 or 5. I can tell you that the LG code worked for my tv. I can power on/off, volume, and change the channel. All other functions require the manufacture's remote. The code I used is 005. There was also 004 but that did not work on my tv. Hope this helps someone!

what is code for sanyo tv

i used the goldstar codes on my vizio tv and it worked

heres a list of codes

004, 005, 006, 012, 019, 056, 057, 058, 155, 156, 171, 172, 196

the code 004 worked on my 32' Vizio HDTV, for the Jumbo Universal Remote