My t7316 is no longer ringing at my desk or showing the caller id

Press program/mute button to confirm and you may program the following items: Set Language, Handset Name, Ringer Tone, Ringer Volume, Message Alert, Ring To Answer, Security Code, VIP Melody, Key Tone, Audio Predial, Vibrate Ringer, Area Code, Tone/Pulse, Registration, Deregistration and Default Setting.
Ringer Volume
From the Handset Setup Menu:1. Press the caller ID-volume ( 6 or 5) button to scroll to the RINGER VOLUME sub-menu.
2. Press program/mute button to enter the menu. SET RINGER 1HI 2LOW 3OFF shows in the display.
3. Use the touch tone pad on the handset to select 1, 2or 3, or use the caller ID-volume ( 6 or 5) button to scroll to your selection. HI is the default setting.
4. Press the program/mute button to save your selection. You will hear a confirmation tone and the new volume setting shows in the display.
NOTE: If you turn the ringer OFF, the ringer off icon shows in the display.

Make sure to look on the phone itself, and see if there might be a button on the unit, or base station, that turns the ringer on/off.

Check your phone wiring in the wall socket is ok

Turning off the ringer won't affect the caller ID display. All that happens when you turn off the ringer is that the phone doesn't make noise any more. The ringing signal and caller ID information from the phone company still will reach the phone.

I received no ID on my incoming calls. I have ensured caller taking ID is checked "ON" in phone options but some reason I do not have caller ID on my incoming calls. Anyone help is greatly appreciated. Thanks.

You can copy and paste this link below to go to a site where you can download your entire manual:

http://www.alphatelecom.ca/meridian_norstar_manuals.htm

From the manual:

1. Press the CALLER ID-VOLUME ( 6 or 5) button to scroll to the RINGER VOLUME sub-menu.
2. Press mute/menu OK button to enter the menu. SET RINGER LEVEL 5 shows in the display.
3. Use the CALLER ID-VOLUME ( 6 or 5) button to scroll to your selection. LEVEL 5 is the default setting.
4. Press the mute/menu OK button to save your selection. You will hear a confirmation tone and the new volume setting shows in the display.

maybe check on the ringer type for restricted numbers- you can change ringers by all calls, restricted calls, and caller id numbers. your incoming restricted numbers is probably set at none or silent

I FIXED IT!!!  YIPEEE!!

What I did was UNPLUG the base's power unit from the wall... waiting about one minute, and plugged it back in.  That caused it to "reboot" the entire system, and the CID now shows itself.

Do you have a dial tone? Do any other phones show caller id? do any other phones ring? Have you programmed the phones? Really need more information in order to help.