Rascal 600 wiering diagram

Question edited for clarity.
Question moved to a better category.

Check out the video and there are links to suppliers.

https://www.google.com/search?q=rascal+245+change+battery

..

The chargers are expensive because they are a 24 volt, 4 Amp charger. These scooters use 2 x 12 volt batteries and provides power to one (or two) 24 volt motors. Disconnect the batteries and check the voltage of each battery and check the output voltage of the charger.

https://tops-stars.com/wiring/pride-mobility-scooter-wiring-diagram/

https://www.google.com/search?q=rascal+600+wiring+diagram

..

go google --type in schematic diagram for rascal 200 mobility scooter and if there is one you will see it as a pdf version download

go to http://www.strege.com/BlueDoc click on rascal then click 600

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

It is the same as a Rascal 600 only the 300 has smaller wheels.
The manual is not much help on the brake, it does not go into repairing the bake, except for checking voltages and replacing the microswitch, some tips are a little oil on the detent balls help to keep it free and movable, but don't get oil on the brake pad.

Scooter Doctor App

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

hi, firstly what controller is fitted (curtis) ? then i can give you a ideal controller wiring schematic but you won't get hold of a Rascal one..

Regards
Rob

www.gewizrepairs.co.uk

I would recommend the correct automatic charger as you don't want to damage your batteries or have a fire/explosion.

There is an owners manual available which has a troubleshooting guide at the following: http://manuals.monsterscooterparts.com/mobility/Rascal/manual-rascal-600-t.pdf

If you have a good relationship with a local dealer they may be able to copy and provide you with one.
Electric Mobility, the manufacturer, in my experience will not provide one to you.

Hi, Unless you have access to a PG Drives fault/programmer unit, You will need to go to a Rascal dealer to sort this out for you.

hi, to bypass the key switch by removing the tiller cover, that is the cover in with the key lock is attached to.

Then all you need to do is short the pins and watch the scooter light up. how ever if there are more than two pins, take the black wire on and short that either to one of the others, do this with care not to touch any other wires within the control panel.

Regards


Please give me feedback..