Is this a free fix?

Go to http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874792&lc=en&dlc=en&cc=us&lang=en&product=57556

there you will find the windows 7 64bit version driver for your deskjet 845c. download it and install it.

CD's don't autorun automatically anymore. Go to My Computer, right-click on the CD, and select Autorun.

Fiend your solution direct from EPSON. Here is your solution...

http://www.epson.com/printer/prob676ijt65/solution

tiuyaq14

hello orlon,first you will need to install the cd that came with the printer. if you do not have the cd you get but it from brother or down load it for free from the brother website brother.com brother tech

if the cd does not run it mean the cd rom or cd rom drive lens is not ok i will like if you can get another printer driver and run it on your computer if the same problem parsist then get new cd rom drive.

Drivers, Software, lost C.D....come this way!

If you have lost you cd or don't know how to install your printer then all you need to do is download the drivers and software from the manufactures website that suits your operating system and printer.

hello tibbar

have a look here for your drivers HP PSC 1210 All-in-One



riz.

This should allow you to download significant pieces of the nissing CD.

Strangely in the downloads a P3150 was a photo printer and in documentation it was an all-in-one so review the drivers and downloads carefully.

Documentation Link

Drivers and Downloads

the settings should still be installed on your comp acces controll panel and select printer and faxes this should give you a list of printers yours should be in this list if not have you still got disk if you havent the you could access controll paned and select hardware devices and make sure printer is plugged in then let your comp search for new devices when its finished select the printer from the list if you dont have disk it will ask if you have it select no then the comp will serarch for the setting for you but it should still be installed on your comp anyway. have you tried just plugging it in and trying it to see if it works cus your comp might just set itself up any way i hope this is some help to you

cant ou access controll panel the select hardware devices let the comp search whilst printer plugged in then a list should come up select the printer in the list tell it you dont have disk then the comp should search for the settings for that printer or if this fails have you tried going onto the makers web site s sometimes you can get this from their fo free hope this is some help to you