Panasonic kx-t7330 suddenly cannot use intercom and phone calls

To end an intercom call, press Off/Power button on both handsets involved. That's the right hand button below the soft keys under the LCD screen. The key descriptions are shown here: https://www.manualslib.com/manual/649267/Panasonic-Kx-Tg8051e.html?page=14#manual . See https://www.manualslib.com/manual/649267/Panasonic-Kx-Tg8051e.html?page=40#manual . (Note: this manual covers both the KX-TG8051E and KX-TG8061E.)

I hope this helps.

Cindy Wells

5results for Panasonic KX T7330

These directions are for the KX-TG5451, KX-TG5452 and KX-TG5453.

If you want to use the intercom feature, you need to know the handset number for the unit you want to contact. The base is zero. The handset number is set when you register the handsets. So to communicate with the base, press Intercom on the handset followed 0. The base will ring until someone presses Call to answer it (or one minute whichever comes first). (Alternatively, you can use the up/down arrows to select H1, H2, H3 or Base. Then press the right arrow key.)

To communicate between two handsets, press Intercom and then 2 (from handset 1 or 3 to connect with handset 2). Again the handset will ring for one minute or until the person with handset 2 answers. (To answer, they can press the phone, speaker or intercom button.)

If someone at the base wants to use the intercom, they need to press Select until the appropriate handset number is displayed. Then press Call.

To transfer a call, press Intercom and then select the desired handset. When the intercom message is picked up, indicate that a call is being transferred and press Off at the handset or base that initially answered the call.

For a conference call, initiate the call then press Intercom and select the handset to join the conversation. Once that person picks up, then press Conf. (I believe that Conf is a softkey so check the display.) This is only possible with the handset. (Another handset can join the conference by pressing the phone or speaker button on that unit.)

The manual for the KXTG5453 is available here: http://service.us.panasonic.com/OPERMANPDF/KXTG5451S.PDF .

If you have a different model of the Panasonic 5.8 GHz phone, please add a comment with the model number and I'll try to give the directions for that unit.

I hope this helps.

Cindy Wells

GO TO THE PERSON WHO SET THE PASSWORD AND HAVE HIM DELETE IT. PASSWORDS RESIDE IN THE PROGRAMMING OF THE SYSTEM AND ARE CONTROLLED BY CLASS OF SERVICE.

press the mode button 5 times and then use the jog dial to get the * down to nothing.
your phone should no longer ring.

On the intercom, if it's a TA or similar phone system, dial 7311# for call waiting on outside lines and 7321# for call waiting on the intercom. (0 cancels).

Carl

On the intercom dial *71x1 where x is 0 for all calls, 1 for outside calls and 2 for intercom calls. *71x0 cancels, or you can just press the FWD/DND button until it goes out.

Carl

• Call into your mailbox (usually by dialing intercom 165)
• Press 4, and 4 again (for "Incomplete call handling")
  By default, three options are enabled:
  option #1: leave a message
  options #5: call the operator
  option #6: return to top menu
• Follow the audible prompts to disable options 5 and 6

Here are some other features you may need

Make sure your Auto Answer button is lit up, so you can receive intercom announcements, and respond hands-free.

Use the Call Forwarding (FWD) to send un-answered calls to another phone or to voicemail

Press BGM (or 1 on the touch-tone pad) for background music, if your system is equipped.

Use Absent Messages to show text messages on other people's phones when you are away.

Use System Call Waiting so your phone will ring even when you're on the phone. Press Intercom and dial 7311 to set it up, or 7310 to cancel.

Use Do Not Disturb (DND) when you don't want to receive calls. Press Intercom, press FWD/DND and dial 1 to activate, or 0 to cancel.

Press MESSAGE when you call a busy intercom number. This will turn on the MESSAGE light on the other phone, and the other person can tap that button to automatically call you back.

If you get a busy signal when you call an intercom number, you can signal the other person by dialing 1 (if that phone is programmed for System Call Waiting (above).

Dial 330 to make an announcement to all phones.

If you want your phone to automatically select an outside line when you pick up the handset, press PROGRAM, dial 99, dial 12, press STORE, press PROGRAM

A few days ago I bought Panasonic KX TG1100 - but the base unit does not ring - only the handset!
Can I do anything about it?

Yes you can. We have and it works fine.