Organe color showing in Active + status led on Cisco ASA 5515

show ipsec stats
this command was introduced in code 7.0
it will show the active tunnels, the previous tunnels and several other stats of inbound and outbound packets.....
for example:- IPsec Global Statistics ----------------------- Active tunnels: 2 Previous tunnels: 9 Inbound Bytes: 4933013 Decompressed bytes: 4933013 Packets: 80348 Dropped packets: 0 Replay failures: 0 Authentications: 80348 Authentication failures: 0 Decryptions: 80348 Decryption failures: 0 Decapsulated fragments needing reassembly: 0 Outbound Bytes: 4441740 Uncompressed bytes: 4441740 Packets: 74029 Dropped packets: 0 Authentications: 74029 Authentication failures: 0 Encryptions: 74029 Encryption failures: 0 Fragmentation successes: 3 Pre-fragmentation successes:2 Post-fragmentation successes: 1 Fragmentation failures: 2 Pre-fragmentation failures:1 Post-fragmentation failures: 1 Fragments created: 10 PMTUs sent: 1 PMTUs recvd: 2 Protocol failures: 0 Missing SA failures: 0 System capacity failures: 0

possible solution;
1-turn off and turn back on
2-open the cover and check the power supply and LED

can you try lower encryption levels on each device and see if that helps? sometimes it is neccesary between Cisco and other devices.

Hi,

The crossover cable should work fine for sure.

Best Regards,
TL

A conflict in the IP address, resolve it

Hello ,
the Steps which u want to export and import configuration in Cisco ASA5510
1- connect yourself to your Cisco gateway by IP
2- Get TFTP server to your PC like( solarwind , Tftp server , ... ) any tftp download and upload program
3- now u need to copy running configuration to your pc by order
#copy run tftp , then follow the steps
NOTE: u should be in the same network or u need your pc and cisco box both have publick IP

4- if u want to put prepair config files to your gateway , you will need to type order
#copy tftp run , then foloow the steps

If u need anything else please let us know by leave your completely request or join us with www.fixya.com

Regards,
Samer

Beep codes and power LED status are pre-post errors. Usually beep codes indicate a problem with a memory module. Power LED is solid green for normal operation. Solid or blinking Amber color power LED indicates a power distribution problem.




Your responses are intended to improve the level of service provided. Please show your appreciation by rating your experience.
Thank You.

http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html

From the US, you can call: 1.800.553.2447

From there, Cisco will be able to tell you what your warranty status is by the device's serial number, and can also provide you with a quote if your warranty has expired.

78tfggi