Just need to program my old RX450 remote to turn LG tv on and of can change channels but not sound and on/ off??
Setup codes to check with LG brand TVs are 0734,0722,0711,0000,0793. If you wish to get more setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts. Setup code list and setup instructions to some popular model remote controls are given.
SOURCE: NEED CODE FOR SETTING GE UNIVERSAL REMOTE FOR SONY TV
I HAVE A GE UNIVERSAL REMOTE AND I NEED THE CODE TO PROGRAM A SONY TV
SOURCE: Have a Universal Remote by LIVING SOLUTIONS, A17G0510
Try the code search with your remote.
1. Turn off your device
2. Hold the button of what you want to program (TV,VCR,DVD) until the red LED light lights up
3. Press the power button
4. Keep pressing Channel up/down until the device turns on
5. Press “OK”
6. Press power and volume/channel buttons to check it
SOURCE: I need to program ge universal remote jc024 for
I also lost the manual for my GE JC024 Universal Remote. I remembered though that you just hold in the button for the device you want to program and the "SETUP" button at the same time for about 5 seconds until the red light on the remote flashes and stays lit. then let go of the buttons.Then you basically just press and let go of the on/off button, pausing for a second or two in between presses until your device turns off. then you have to press the "ENTER" button and it'll store the code for that device. This method just cycles thru all of the possible codes for that device. sometimes you get the wrong code and the remote wont completely work. like hitting the volume button makes the tv mute for example. just repeat the steps until the device turns off again and eventually you should be able to get it. hope this helps.
336 views
Usually answered in minutes!
×