Washer out of balance - Frigidaire FWS833A Top Load Washer

Unbalanced Load

If uL (unbalanced load) appears in display, the load is out of balance. The washer is running a load-balance correction routine. Allow the washer to continue. If the dial is flashing and the washer has stopped, redistribute the load, close the lid, and press START/PAUSE.Dec. 14, 2019

uL - Error Code - Washer - Product Help ' Whirlpool

producthelp.whirlpool.com > ... > Error Codes

..

Thank you for your inquiry, Jay Kraemer!

From the information you have provided you would like a video on how to balance your Frigidaire frontload washer. I was unable to find any information on balancing your washer from your manufacturer. This could mean that it is not a simple DIY job. You may be able to perform a generic search online for any information except I would recommend having a professional technician out to accurately balance your washer. This will help to avoid any future issues. -Matt

By "balance", do you mean balance the load or balance the washer to keep it from wobbling on an unlevel floor?
You can adjust the front feet of the washer to "level" it with the floor.
Sorry I didn't quite understand your meaning. Hope you can use this info.

Your switch is bad. You don't necessarily need the switch. Snip the wires off either side of the switch and fuse them together with a wire connector.

http://www.askmehelpdesk.com/plumbing/whirlpool-out-balance-spin-cycle-18991.html
http://fixitnow.com/sbrvrs/washers.htm

http://www.repairclinic.com/Washing-Machine-Troubleshooting


This model of washer does not have an out of balance cut off switch. If the load is not balanced properly the tub could hit the cabinet sides. If the unit spins evenly while empty & out of balance while loaded, I recommend checking & balancing the load. If the basket spins out of balance while empty, I recommend having the suspension springs & balance ring checked. Be sure not to wash light fabric with heavy fabric clothes. Also ensure that the adjustable feet are level, that's most important.

Most has a balance ring built onto to the tub, make sure thr balance ring is not damaged, It is normal for the tub to shake in the spin cycle with nothing in washer

The shock absorbers that hold the tank are broken. Then the load will move the washer all over the place.
Look online for an exploded diagram and order the new shocks for it

well there's a counter weight that could be loose or broke or the support hangers for the tub may be broke or loose.

THESE WASHERS SIT ON A SKATE PLATE PICK UP ON THE TUB A TURN IT A BIT AND TRY IT ONCE IT IS BACK ON THE SKATE PLATE WILL OPERATE PROPERLY

there is a spring that hooks to the back the tub of the washer and conects to the frame of the washer its there as a counter balance. if that spring was not put back in place the washer will shake like crazy. if that spring is conected the basket is warped