Adress needed need adress to send stanley tape measures back for warrenty

You can put it back on but depending on how it broke and how you reattach the measurement will be off a tad.

if this a tape measure, then pull the old tape all the way out.
hold the spring end, unhook the tape and put the new tape onto the spring end. Let it wind back up

Spring has stretched now Best get a new one.

you can try to pull the tape all the way out and then with a rag lightly oiled let the tape rewind back into the housing if that does not work then you probably need to purchase a new tape. for whatever reasona the spring inside has gotten weak. i use a tape daily and have had this same problem when a tape gets old or abused

Did it break and go flying up inside there? Take it back where you bought it, tell them you want a new one, they will replace it, all Stanley tools are warranted, the dealer may not want to do it, but he has to. You will never get it right by replacing the blade. I take that back, you might get it right.

No. You'll have to replace the tape measure, or find another similar model to rob the part from...See here and here.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

stanley tapes are life time warranty take it back where you bought it they should replace it.

Press the red button - (distance) you will see a red dot on the wall you are measuring - then you will hear a beep - release the button and read the display - the measurement should be displayed and accurate within a quarter inch.

On the bottom of the stanley clock you will see a little area that you put a coin in and twist,it will pop open to the battery and setting knobs.