My Hygena cooker hood fan (model APP2540) stopped working.

Try e-spares. The other alternative with control boards is to find an electronics engineer to check components. Switches tend to be generic.

https://www.espares.co.uk/browse/at1091ma1722/cooker-hoods/tecnik

https://www.google.com/search?q=tecnik+tke5445+parts+diagram

..

Hi Gerald,

for old Rangemasters it is difficult to find the original parts, as they have their outside model.
But when you open the switch carefully, you will find 2 switches on a board, one for the light and one for the fan.
These parts are common for a lot of cooker hoods. The switches look like the one of link 1
Genuine Creda CRV10W Light Bulb Switch Cooker Hood eBay

the second link gives you a complete unit, so the light switch and the vent switch on a board

https://shop.ukwhitegoods.co.uk/08086215-hygena-cooker-extractor-hood-switch-pcb

I hope you will find the right part.
Kind regards, Dik

if u have a meter u can check the switch and the motor,By putting it on the continuity mode and check to see if u have a bad motor or switch

This sound like the pcb for all your cooker hood spares visit our site

You-Tube video "8eLuShj-RAg" placeholder (do not delete)

well is there a switch you might want to check that out.

fan & light on elica extractor fan not working over cooker

FAN AND LIGHT DOES NOT WORK
my zephyr typhoon stopped working. Neither light not the fan come up. I am sure there is power going into the unit. I turned on the light one day , the light cam on and suddenly went away. From then even the fan stopped working. any information on what happened is appreciated. Thanks

If the hood is old and greasy, get a new one and keep it clean.

Check power from the wall.

Check power in the wiring coming into the hood.

Check to see wiring is not broken.

Hi - I have a neff extractor fan and have the same problem. The light and fan have both stopped working. Does anybody know where I can find the fuse as I suspect that this may be the problem too?